3 in 1 multifunctional moisture, PH and light meter. Use the Moisture Meter to easily check on the condition of your plants. The meter will quickly tell weather your plant is doing well; dry and needs water or wet and could use a day to dry out. You will never over/under water your pants again. Specifications: pH Range: 3.5-8 Ph (3.5-6.5 ACID, 7 NOR, 7-8 ALKALI) Moisture Range: 1-10 (1-3 DRY, 4-7 NOR, 8-10 WET) Relative Light: 0-2000 lux (0-200 LOW, 200-500LOW+, 500-1000 NOR 1000-2000 HGH) How To Use: Step 1: Switch moisture/pH/light position Step 2: Stick the probe into the soil about 2-4 inches Step 3: Adjust the position of the probe until the pointer on the dial swing slightly Step 4: After 10 minutes, Note moisture/pH/light level in the dial Step 5: Remove probe from soil and wipe clean after each use Pls note: 1. Soaking the soil firstly before inserting the meter .the probe in soil should be 2/3 of the depth (above 10CM measured the most accurate). 2. Pay attention to the electrode,which can not touch the stone, do not use it too hard, or easy to hurt the electrode. After use,remember to wash the electrode in time. 3. Dont allow to use it directly in water. 4 To avoid damage,pls take it out after using.
Trustpilot
2 days ago
4 days ago
