4 Piece 2 Inch C-Clamp Set - Industrial Strength C Clamps for Woodworking, Welding, and Building…

I wanted to love these clamps because of the value. But unfortunately they didn’t even hold up to a wood glue-up for a farm table.I tightened down my clamps in sequence and this one exploded under pressure.Down right unacceptable. These are clamps they shouldn’t shatter under pressure. I obviously didn’t put much pressure on the clamp because the t-bar is still straight.

These clamps are made of cast metal and the quality control is unacceptable. The two halves of the casting mold are not aligned, and the mismatch creates a significant ridge in the fixed clamp surface. This irregular surface makes the clamps unsuitable for typical use.

Just received and spotted a flaw right away. Appears to be sturdy, but lacks quality craftsmanship. Specifically, there is a casting line that runs up the center, all the way to the foot end. That would be ok, if they ground it flat, but the foot end, that you place on something to clamp it, is about a 1/16 lower on one side. That will cause the clamp to twist and fall off when you tighten it. I thought about returning, but I'll just level the foot out flat with a grinder and call it good. Once the foot of the clamp is smooth and flat, I'm sure they'll work just fine.

I wanted to find a way to make more space in my living room for my puppies to play and relax. I put an ottoman next to the couch, but the cushions kept sliding off. I put a plank on the side of the ottoman facing away from the couch and secured it with the four C-clamps. It probably isn’t necessary to use all four, but the cushions do stay on and the puppies have more room to play and stretch out after they are finished playing. If I ever need a C-clamp for another purpose, I know where to find one (or two).

Purchased this clamp because I needed a 4 inch clamping ability and the descripion noted it was a 4 inch clamp. However, because of the bottom screw, the clamp will only accomodate about 3.5 thick work. So, although the clamp appeared to be well made and a good value, it did not work for me so I am returning it. I could not comment on the sturdiness or durability since I could not use it.

Excellent value/ The c-clamps are handy to have on hand and very affordable. You have to have a handy set of clamps of differing sizes in your tool box! These are strong and perform perfectly.

Obviously stronger than what is available in local hardware stores

Don't overtighten they're cheap clamps and if you're Putting any extra strength on them the same will break. But they work great for holding stuff together

I bent two of my other clamps doing a job that these two have now done without issues. Handles as better than I expected. The threads worked well - I still coated them in white lithium spray to help movement. I'd purchase these again when I need to add to my collection of tools.

Will be using these as additional support for garage winch. They look to be good quality with good longevity.A little bit of grime on the threads but nothing difficult to clean if needed.

C’est des bonnes serres par contre l'arche n’est pas très haut donc moins facile de serré des pièces qui sont plus éloignées

The threaded bar is not as good quality as some of the other clamps I have, but they work well enough and the value for money is outstanding.

Good quality for price, jaws only open to 5-1\2"