Cat 7 Ethernet Cable 2-Pack 2 FT, Cat7 Flat High Speed 10Gbps 600MHz Shielded Internet Network Patch Black Cord, Ultra Slim RJ45 LAN Cable, for PS5, Modem, Router, LAN, Computer with 25 Cable Clips

I bought these to use from my security camera box to the router and the connection has been stable.I also used the other one from a router to a mini pc and I did notice a more stable connection. Great item for the cost. will be buying more very soon

The Cat 7 cables were exactly what I need to connect my TV to a wall outlet. Very good product that was accurately described.

good quality replace 5e cord that was slowing down speed when checked was only running 100 speed and should be getting close to 1gig so switched out to cat 7 then checked speed ran up to 800gb speed helped with my cameras and everything else connect to a switch work exactly I was hoping it would

nice cables. My switches confirm that they can negotiate 10 GbE over these.

PRODUCT REVIEWED: Mygatti 2-Pack/6ft Cat 7 Network Cables ASIN: ‎B0CCRQ2Y75REVIEWER EXPERIENCE: Career Network Design EngineerPACKOUT ACCURACY: Plastic Bag containing two coiled Cat 7 Cables, each measured at 5.97”. Cable conductors are terminated on RJ45 8P8C connectors as 568B. The smaller bag contains 25 Nail-in cable clips properly sized (rectangular) for Cat 7 Cable. (See Packout photo)OVERALL IMPRESSION: Packout was accurate as advertised. The cables are decent quality, metal plated shrouds on both ends as required for Shielded Twisted Pair. Solid Copper Pairs are used, not CCA which is good. *However, the required AWG rating for Category 7 conductors as required by the ISO/IEC 11801:2002 Standard is 23AWG, the cable marking on both cables indicates 32 AWG (See Photo).TESTING PERFORMED: Each Cable was tested connected to an INTEL Intel(R) GbE card installed in a Dell R630 Rack Server; the other end is connected to a Cisco 3900 router 1Gbps EHWIC Module. Live server traffic was routed through each cable for 15 minutes and monitored with Dell iDRAC S/W.TEST RESULTS: (See test results photo) Each cable passed 50K of bidirectional IP packets with Zero Frame Check Sequence Errors (FCS) and Zero Alignment Errors. Good ResultsTEST SUMMARY: Testing was limited to 1Gbps throughput, Cat 7 cables are rated to 10Gbps, but I was unable to test at that rate. I placed a small hobby motor, an EMI noise source, next to each cable testing the integrity of the cable shielding, as the results show no errors were introduced.PROS: Appears to meet/exceed the Cat 7 ISO/IEC 11801:2002 Standard @ 1Gbps (10Gbps was NOT tested). The cable clips included are properly sized for Cat 7 (I did not use them). Measure length is as advertised. The Copper Pairs are pure copper and not copper-clad aluminum (CCA). CCA is junk and can overheat.CONS: Regardless of the success of testing at 1Gbps, the cables are marked as 32 AWG which is not compliant with Cat 7 Cable specifications - Ref: ISO/IEC 11801:2002.Rating: I have rated at 4 stars because of the non-compliance issue with the standard. In some cases, a lower rating would be justified, but if the intended use of these patch cords is ONLY for residential use at 1Gbps they should perform well and may still exceed the performance of Cat 5e and 6.Photos included: Packout (1), Test Results (1), Cable AWG Marking (1)

Super high quality cable and a good value

Super fast shipper so far everything works great thank you so much will definitely do business again highly recommend I have been buying stuff on Amazon for over 15 years and I can finally say I found a company that does what it say's hundred percent hands-down the best on Amazon.

Todo muy bien