Z-Uno 2 Shield - multifunctional smart home device based on Z-Uno (DIN-rail)

When you need more than just a sensor and a couple Arduino clones for your Home Automation project. The Z-Uno 2 from Z-Wave.me can fill the gap for just about any need that you can think of and even more that you haven’t thought of yet. This is easy to use with a web based configurator page that all you have to do is select the type of device you want it to be, such as a thermostat , switch, dimmer, input, output etc, etc, the combinations are almost limitless. For example let’s say you want to measure voltage you can select different ranges such as 0-5V, 0-10V and others as well. You can use the serial port, 1-wire, I2C, and more to transfer data into and out of this little marvel. So after you have configured it online you then simply transfer the custom sketch as is using the easy to use Arduino IDE that upload your sketch to the board. But wait, there’s more. Using the Arduino IDE you can modify and extend the capabilities even further. I have not found the limit of what this can do. If you get stuck on how to implement a certain feature they have an awesome Forum that is dedicated to this device. The Z-UNO 2 is made by Z-Wave.me which is also the web address where you can find more information on all the items of Z-Wave.me

I was able to manage my floor water heating in 4 rooms with this device. i just used 4 DS18B20 wires and valves. All the tuning I've done was via their online configurator. As of today, it works fine. Seems I saved some money, too, as this device is way cheaper than 4 thermostats. )))