HDMI Splitter, Techole Aluminum HDMI Switch Bi-direction 1 In 2 Out or 2 Input to 1 Output Manual HDMI Switcher, Support 4K 3D 1080P, Plug and Play for Xbox, PS4, PS3, Blu-Ray player, DVD, HDTV

I’m using this device to alternate between a direct signal from PS4 Pro to 4K HDR tv, and then from PS4 Pro to PSVR (launch unit which does not support HDR pass through) back into the same 4K tv. PS4 Pro to tv performs splendidly and recognises the HDR. PS4 Pro to PSVR to tv, automatically recognises the lack of HDR and makes the necessary adjustments. All that I have to do to switch between the 2 channels is select the desired hdmi input on the tv, then press the button on the switcher to select between direct PS4, or via PSVR. Restarting the PS4 is not required to switch between output channels. Finally, I’m using new amazon basic hdmi 2.0 cables (2 x 3 meter, & 2 x 0.9 meter). This is absolutely a must if using a 4K display.

So I've had a few days using this product and I honestly can't tell you how good it is - making switching from the Xbox to the Sky box speedy and easy to do. Usually, when we want to change the consoles over we would have to find the wires for each console and switch the wires over - which can be a difficult task. However, using this HDMI splitter it was made much easier to do, you just click the button on the HDMI splitter and that's it!!

Why does a modern smart TV have only 3 HDMI inputs, Samsung?While they don't answer that question I needed four so found this useful adapter to turn one HDMI input into two. It is small, hangs easily behind my TV, and does exactly what it says - allow two inputs into one. You just press a switch to change from one to the other.Could it be better? Well, yes if it switched automatically to whichever input was 'live', but then sometimes both inputs might be 'live' at the same time if not switched off, and no other similar adapters on Amazon's site appear able to do that so it is not really a fault.

This Techole HDMI Splitter looks well made, the case feels as though it's mainly metal and the three HDMI sockets are a snug fit with my existing leads. Comprehensive instructions/specs are included in the box too.I bought this unit to free up an HDMI ARC port on a Panasonic TV. This switch is shared between a Blu-Ray Player and an old DVD/VHS video player. This is an easy to operate the product with just a single button press to switch between the two players, and an LED indicates the selected channel eg. 1 or 2. Picture quality seems unaffected by the use of this device and switching is flawless. Overall a good solution.

Initially I failed at getting it to work and the seller prompted me to try again and even offered a refund but i've managed to get it working so i'm updating me review. Fair play to the seller for the good customer service and chasing me to fixing the issue.I'm using a 1080p and 4K TV as a display for my PC. I had no issues with the 1080p display but the 4K initially wasn't switching properly. It worked in isolation but never when combined with the other TV.In the end the solution was that I needed to use the only HDMI port which had ARC - audio return channel (don't know why) and set it to the non-enhanced setting (which I realised might be the case if the switcher can only handle 30hz).At this point the switching functionality kicked in as expected. A lil fiddling with the PC resolution settings and I was able to get a decent quality output on the 4k. It's not supposed to handle 60hz but the PC is showing that it's outputting that, might be getting dropped to 30hz on the TV itself but I can't tell the difference from inital testing.I've not used it very long just yet but it actually seems to do exactly what I was expecting.

I know the scores I've given seem contradictory but I'll try to explain . The product appears very well made , when it worked it worked well , the picture was not degraded at all by using the product but ; - I have so far used it twice , the first time it was used simply as an hdmi extender (simply joining 2 leads - not really what I bought it for) this was fine . The second use was as it is intended , one source , 2 monitors being fed to . The problem was that the picture kept disappearing for a split second then coming back for about 4 - 10 seconds and then disappearing again and so on . Totally useless .

I brought two of these devices for a complex set up involving dual monitors for 2 PCs as well as a connection to the television.Despite the HDMI signal going through two of these switching boxes the quality of the screen is excellent and able to handle 120 Hz output. Switching is very easy and the button is of good design, the light-up numbers make it simple and easy to remember which connection is currently being used. Furthermore, it is worth noting these boxes can be easily attached to the wall with blu/white tac, with much easy.These small devices have a warranty and the customer service is great, having received a follow-up email to check if I wanted to return the item (although of course, I did not).Despite the company being small and the company website being incomplete at best, the product is of quality that far precedes what one would expect from such a small vendor.9/10. Would recommend.

Having only 2 HDMI ports on the back of my TV (one exclusively for FIRESTICK) I then have the problem of both a (Virgin) TV service and a Blu-ray player. This device is so simple, so perfect, and so sensibly priced I wondered where the catch was. Maybe it wouldn't actually work? Nope, works a treat; maybe the TV will not recognise it? Of course it does! Maybe there will be a drop-off in picture quality? Not at all. This simple little device has proved perfect in every way and I highly recommend it to anyone who has the same televisual problems that I had. EXCELLENT PRODUCT, thank you :-)