LightingWillLED Connectors 2Pin 10mm, 10 PCS Pigtail Connector Transparent Solderless, LED Tape Light Connector 2 Conductor for COB/SMD 5050 Single Color LED Strips

Workd good contact prongs are exactly correct

Overall I'm happy with these. I needed to make some custom-length LED strip connectors and this kit was perfect for the task.Pros:- secure locking tabs hold the LED strip in place- plenty of wire length for most connections, but I like having the ability to add wiring for longer connections- allows for direct wiring to automation controllersCons:- None, these worked wellIn summary I'm really happy with how my project turned out, and I'm glad I chose to use these connectors because it made it that much easier to setup and customize.

This is a nice set, I like the price and the fact that you get so many. I didn't have any problems.

These 3 pin connectors save so much time when doing any non-standard wiring run of strip LEDs. Need to bend around a corner? Simply cut, connect, and you're done. Need to make an octagon? No problem. Need to make some crazy 3-D shape? Easy.After working with strips extensively, I've wound up with lots of leftover scrap pieces. Yes, I can solder them together to make one continuous strip, but these types of connectors are so much easier/faster! And no solder fumes....

Only received half the order when it was promised and there were at least 5 connectors that did not work based on factory connection not being made correctly. I would go with a different brand next time.

They're wire connectors that don'tconnect so well.Update:I was a bit disappointed that a section of my 2 pin led strip lights was not lighting up consistently. I realized after a few days that I needed to use the tip of a utility knife to reposition the contacts on the connectors inward for a more stable connection. The company responded to my initial review and graciously refunded my purchase.

These jumpers are a perfect fit for 2-pin 8mm strip lights, which is a common size strip light. Make sure you are buying the right size. This is not a one-size fits all jumper. They need to be exact. Otherwise, they won't work. The connectors must line up.They are very easy to use. They essentially slip right through. Then you snap them shut.Also, check to make sure you are cutting the strip light in the correct spot. The strip light should be marked where it is safe to cut. If the strip light is not cut at the correct spot, these jumpers will not work.

Easy to set up with most led lighting, easy to hook up and install. Great buy.