TIANSE Silver PLA 3D Printer Filament 1.75mm 1KG Spool Filament for 3D Printing, Dimensional Accuracy +/- 0.03 mm

Never go wrong with Tianse, always a great filament and a true white colour perfect for lithophanes.The dimensional accuracy was spot on and the print had no issues on a stock creality machine first time. Will certainly buy again.Love Tianse!

Did temp test and seems to work at nearly all PLA temps (as seen in my first image).Would recommend going for 180-190°C Extruder; 45-60°C Bed.For the price I am quite surprised at how good this stuff is. Its worked really well so far and not had a single issue with it. Has a smooth white finish and is very nice to look at/feel.

Packaged well, prints ok but have to say using my normal settings for other PLA's (that work great!) this filament sometimes under extrudes and leaves tiny gaps (printing at 0.2mm) on the outside of prints! Even though i really slow down external walls.....maybe i needed to up the temperature by 5 degrees? however on exactly the same prints i noticed under extrusion in different places.Its not a 'bad' filament, but compared to the recent 3 other black filaments I have purchased on Amazon because they are cheap, this one has given me the most challenges - it got a 4 star as none of the prints ended up being scrap, they just aren't perfect all the time with the tiny gaps!

When I started my little 3D printing business 18 months ago, Tianse was my go-to filament, particularly for reds. I had tried other reds but the colour just wasn't the same. Tianse was rich and vivid. As someone who has over 30 different colours in my dry-box, from all sorts of different brands, I'm always excited to try new filaments, but not for my red... that was always Tianse.Fast forward to the last few months and the love affair has ended. Firstly, as another reviewer mentioned, the filament is brittle and tends to break easily. Even though this had been happening for a while, I'd been happy to put up with it because there wasn't any real alternative with rich red colour for a comparable price. But the last few spools of red from Tianse are no longer rich and vivid but are pale and washed out.However, that's not the biggest problem. The last couple of rolls have been causing my prints to fail, with massive under-extrusion and stringing, something which I've never had much of a problem with. At first I put it down to the old issue of the Bowden tube separating from the nozzle inside the extruder assembly of my Ender 3's. I was surprised that both my Ender 3 printers had a similar issue but I dutifully cleaned the assembly out and reassembled. My next test print with a different colour was perfect so I assumed that was it.But that wasn't it... the next print with Tianse red suffered the same fate, so I tried my other Ender 3 and that did the same. In desperation (I had an order to make for a customer) I found some old red filament that I had in a multi-colour pack I bought for my kids 3d pens. I wasn't expecting much but I was amazed as this printed off perfectly with barely any stringing and zero under-extrusion.So, if you love your red filament pale, washed out, brittle and you like your prints to look like a birds nest... by all means, have a go.But I'm moving on...

Good filament, prints quite nicely, luckily this was something that the delivery person didn't fancy after having a good look through the parcel so they kindly delivered this one. Unlike quite a few of the more recent deliveries like the phones that keep getting "lost" on their way.Anyhow, prints quite well at 210 degrees and sticks like a demon to the bed at 60 degrees, no issue with it coming off half way through a long print.

Great black pla, had a black from another manufacturer and turned out terrible and needed another for another project so tried this brand, first impression was well sealed, wound on great didn’t see any crossover, done a small test cube just to see what the quality is like then printed a toothless overnight for my son which turned out amazing. Will be ordering some other colours of this make to try them out printing temp for me was 202/60 they do recommend bed temp of 30-50 I just forgot to turn it down

Really nice shade of green. Print at 205+ to get a glossy finish, or <200'c to get a more matte finish. Accurate enough to print miniatures (see picture). All in all, pretty good.

This filament is so beautiful. I didn't even do a test print, just plugged it straight into my CR-10 and did a 33 hour print. It printed absolutely perfectly, better than any PLA I have used (including brands twice as expensive), and the finish is superb. Green is by far my favorite, it has a really nice glossy metallic finish to it.

Tianse PLA en negro tiene un bobinado casi perfecto, sin problemas de atasco. La calidad es muy buena y a pesar que lo cogí un poco por casualidad es uno de los PLA que suelo comprar entre otros. Seguramente es muy fiel a los 1.75mm de filamento y es difícil de o tener falta o exceso de extensión (si tu extrusor funciona bien claro y esta bien calibrado). No es un negro brillante pero queda muy bonito. También va perfecto para imprimir y pintar luego. Recomiendo hacer un test de temperatura en torre. Solía imprimir a 210 grados y me iba la verdad que bien pero para evitar stringing hice la prueba y la mejor temperatura era 195 que es bajito, pero bueno eso depende del global de funcionamiento se tu impresora. Yo tengo un All metal hotend con un bondtech de extruder Bowden y la retracción la tengo a solo 2.5 a 30mm de velocidad. El único contra es quizá el precio que es más caro que el resto pero la calidad se paga. Este PLA lo tengo para piezas de calidad, para piezas mecánicas o de más velocidad utilizo otros más baratos.

As my favorite filament becomes harder to find and the price on it continue to rise with demand I have been on the hunt for a new filament to us.The search is over.Tianse PLA far exceeded any expectation i had as i put it through its paces.Firstly Packaging was nicely sealed with a large decisent pack clearly visible in the package. the filament inside was nice and flexible with no signs of being brittle.Second. I was worried on the winding as it looked more haphazard than other rolls but the roll unspooled beautifully with no hang ups over 20 hours of printing.Third. printing was easy set it and forget it. I ran a temp tower first and found a happy temp set of 215/60. First layer adhesion was a little wonky but the fact that i only ran a temp tower with it over several benchmarks means there is a bit more to test and tune with this filament.Will I test and tune this filament more...Undeniable yes. Consistency on the roll 5 measurements taken every 1/2 hour showed a consistent 1.75 my worst deviation on diameter testing was a 1.74. The color selection available has me wanting to replace my entire rack of filament with Tianse as i need to replace colors. For the price point it was worth more value than its purchase price.To end this review all I can say is take a chance inexpensive does not mean cheap.

Hatte bei der ersten Spule KEIN Problem. Mit sauber eingestellter Druckbühne keine Haftungsprobleme. Auch nach längerem Gebrauch kein Problem mit gebundener Feuchtigkeit. Immer saubere Ergebnisse. Top Filament!

Excellent, easy to set up and use. Great packaging as well. Received earlier than expected. Overall superb value for money

Es una PLA con un color rojo intenso muy bonito, se imprime bastante bien y sin problemas. El acabado tambien fue de mi agrado. Será mi color rojo de base en cuanto a PLA se refiere. Muy recomendable.