DoRight Digital Temperature Controller,LCD Screen Heating Cooling Temperature Switch,Thermostat UK Plug 250V/13A Digital Temperature Controller for Greenhouse Farm Terrarium Reptile

Keeps set temperatures, easy to set up, works well, so far.

Really easy to use-Works great-Good price

The media could not be loaded. This is being used to temperature control a panel heater which has a jammed thermostat, so would always be on. By putting this between its own plug and the socket, I can programme it to switch on or off depending on the room temperature. The temperature probe is on the end of about 1½ metres of fine cable so can be placed away from the socket, if necessary.Its display is good and clear. Telling you the current temperature of the probe and what temperature ranges you want the power on for. It does have timing functions too, as an alternative, but these were not relevant to me.⚠️The instruction manual looks like its been through the hands of three or four very poor translators. Thankfully a bit of guesswork proved successful.🐈‍⬛To stop our cat from trying to chew the wire, we sprayed it with Bitter Apple Spray ( https://www.amazon.co.uk/review/R2MDS1N5KSUB3F/ref=cm_cr_srp_d_rdp_perm?ie=UTF8&ASIN=B0002DHPRQ ) which works for most pets.

Some of these can be fiddly to use but this is easy to set up and adjust and seems to work well.

Bought to connect to a heater in our " garden room " to prevent plants in there from freezing in winter. Works well.

Seems to work well, although sensor cable only 1.8m not 3m as advertised. Not sure if it will be long enough for my requirements.

This is a nice compact temperature controller, the display is clear with large digits and backlit, also very easy to set up, am using it to control the heating in a greenhouse, so it is great that it has a remote sensor which I can put in the soil. the reported temperature looks to be accurate enough for this purpose...

I got this to control a plug-in heater with a broken thermostat. I am using this to switch it on when the room temp is low and off when it is high.The temperature sensor is on the end of about 5 foot of fine wire so can be placed away from the heater to get a better reading of the room temp.Its display is good and clear. Telling you the current temperature and what temperatures it will turn the heater on or off. It does have timing functions for scheduling but I wasn't interested in that.⚠️The instructions seem poorly translated, but a bit of guesswork got it behaving well.