Xotic Tech 1PC 8-Pin LM449 CF18 AA1185 Electronic LED Flasher Relay Fix for LED Turn Signal Bulbs Hyper Flash Issues Compatible with Lexus or Scion or Toyota (Part#: 81980-50030 066500-4650, etc)

Fixed the fast-flash condition after installing LED turn signal bulbs in my 99 Cougar. Plug and play.

Quick easy install and easy blinker timing adjustment

BACK TO NORMAL BLINKING..

Bought this to upgrade my 06' Tacoma Sport to LED turn signals. Device works great, no hyperflash. I do notice my signals now flash once more after I cancel them and they never used to do that. Not a problem though. YMMV when it comes to installation. I bought my truck with an afermarket tow package installed. Turns out the area around the fuse box where this relay is installed was an absolute rat's nest of wires. Getting to the back of the fuse box to install this and putting everything back together again without pinching anything was a bear. Would not want to ever do it again.

Installed in 2006 Scion xB to be able to use LED lights in the turn signals. Prevented hyperflash once LED bulbs installed, but every time turn signal stock self-cancelled, it flashed three times in the opposite direction. This may be because my car never had the feature where if you tap the stick it flashes a few times for a lane change; I have to turn the turn signal on manually to change lanes and then cancel. But the new relay is so sensitive that when the turn signal self-cancels, the spring action must briefly hit the other side, which activates this feature in the relay. Just put the old relay and bulbs back in. I can live without LED turn signals in my old heap, and for the price I didn't even bother returning. Just thought I'd mention this to warn others.

Important to note that this flasher works differently from standard series driven flashers. You need to modify how it is wired into your circuit if using it with an add-on turn signal switch. The + lead goes to 12 VDC, the "L" lead to the light/switch circuit being operated, the - lead goes to negative of the battery circuit.Consider this is an electronic device, so it needs supply voltage and ground to operate. Once load is detected on the "L" terminal, the lighting load will flash and the device will click on and off. I'm using it on my golf cart, but I assume it is a plug-in replacement for some particular automobiles.This will not be a plug-in replacement for series connected flashers where the - terminal goes to the lights and the L terminal to the dashboard or switch indicator. But, when wired correctly, it works with the minimal current draw of LEDs up to incandescent car lamps. My golf cart has LEDs in the front, regular bulbs in the rear.A search on the internet for this part number will lead you to the electrical circuit diagram. Or see the attached diagram. With the typical add-on switch and this flasher, you cannot connect the in-switch indicator, the lights will then light continuously.

No more hyper-flash

The item does not correct the hyper flash for the turn signals or 4 way flasher . in fact nothing happens at all. NO flashing at all. At least the OEM flasher allows all the signals to function in hyper speed. I also tried the Novita EP35 flasher which the Auto parts guy said might work, but I got the same response , no flashing at all. No clue where to go from here.

Worked as needed