Supreme Suspensions3" Front Leveling Kit for 2005-2023 Toyota Tacoma 2WD 4WD - T6 Billet Aluminum Front Lift Strut Spacers (Black)

Quick and easy install. Came with everything you’ll need, except locktite but everybody should have that anyways. Also, I had to grind down the 3 studs about 1/16 of an inch so it would sit flushed. My camper shell adds a little weight in the back so it has a little bit of a “Bro Lean”. But it’s just enough. I will update with new wheels. Currently stock wheels.I rarely go off-road. When I do, it’s just pulling up to the campsite or cabin haha. But I wanted my Tacoma to have more of an aggressive stance and some more clearance. These spacers did exactly what I wanted. Totally makes the ride feel a lot better too. If you’re looking to get these and reading my review. Just get them. You won’t be disappointed.

Mounted on my passenger side 2014 GX460. Leveled out the KDSS lean. Works and gets the job done.

Added a 1/2 inch of lift to level out the truck. Install was straight forward and easy. The added goodies was a nice touch. Will buy again!

Instructions over-simplified install...made it seem easier than it was really going to be. Make sure you have plenty of tools and time because there is a lot of disassembly/reassembly of the front end involved. On my 2012 FJ, this kit actually gave it a little more of that "Carolina squat" look. Tire-to-fender clearance in the front was 8", same place in the back was only about 7", so needless to say I just bought a small spacer kit for the rear. Overall all goal was to get 32" tires under it and not have them look stuffed in there. Still rides good and it is a cheap and clean looking kit.

Was skeptical because of the somewhat mixed messages on all the ".5" lift. These are 1/4" shims. BUT, I did not want larger spacers but needed a minimal lift because I added a steel skid plate. They did exactly what SS states .5 lift. As for now I have about a 3/4 lift but probably will settle more. Have B 5100 on the front. Easy to do if you watch EO video. You cannot, with installing this, put anything larger on the Tacoma 3G top hat without all the extra screws etc... Just want these to bring back up the front a bit after installing a steel 50lb skid plate. THEY DID THE JOB AND SUPER EASY TO DO. VERY satisfied! Thank you SS!

Great product to level out your new Toyota 4Runner’s ride height. I’ve installed this product on both of my 4Runners and it works flawlessly both on and off road!!. Simple to install.

I have an 04 4runner with X reas Suspension and got the 2 in lift (1in spacers) and these things fit fine and leveled the vehicle perhaps it sits a little higher in the front but barley. FYI if you have X reas susp. You Cannot Disconnect the X Reas Line!!! these things will install just fine without doing so, However the Strut needs to be rotated 180 Degrees to fit the spacer which results in the hydraulic line facing the other way this is not an issue what so ever since the line has enough play in it to be fully flexed or have the vehicle up on the lift and the tires fully dropped. Overall I would recommend to anyone who has the same vehicle with X reas suspension since you have no other option to lift the front besides replacing all 4 shocks and struts and removing the x reas altogether.

Lifted the front end of my 2012 Tacoma sr5 4x4 exactly 2" as advertised, making the front end level with the rear. I wouldn't say the install was difficult but it was tricky, I found nothing online that showed a complete installation tutorial, so I'll try to describe how I did it in hopes to help someone else, pay it forward so to speak. I want to preface this by saying that I am not a mechanic, proceed at your own risk, every situation is different, this is just how I did it. It did take a while for me to figure it out:1. Place vehicle on jack stands2. Remove front tires3. Disconnect sway bar link from steering knuckle4. Disconnect upper control arm from steering knuckle5. Unbolt the sway bar from the frame in order to move it out of the way, you'll need the room this creates to remove the coil over shock, this is the secret, can't be done without doing this6. Now you can unbolt the coil over on the top and bottom7. Remove coil over by pushing down on the lower control arm, be sure to keep the steering knuckle supported so it doesn't flop around and put pressure on the brake lines8. Install the spacer on top of the coil over and reinstall the coil over9. Complete the project by putting everything back together in reverse order of above

These spacers looked very good with the powder coating, and they serve a very useful and simple purpose. The powder coating was too thick, and the slots needed to be elongated as they did not fit over the stats on the strut.

Muy buen producto

Fast shipping. Product leveled the front end of my 2016 Tacoma allowing 18" rims and tires to be installed.

Bought this for my 2018 Toyota Tacoma sport 4x4 fits good. No issues have had for about 2 months now daily driving.