The stickers are contour cut (without background) and only the pure image remains as a sticker. You can choose from the colours shown in the second photo in our gallery. - - Gluing of film stickers and plots Please note: Make sure that the surface is absolutely clean and free of grease. Even surfaces that appear clean should be cleaned again with a non-greasy cleaner before proceeding. Immediately before sticking, the transfer paper, foil should be pressed against the actual sticker again, for example, with a rubber roller or a squeegee. This reduces the risk that individual or particularly small parts will not stick. The sticker is made up of three layers. The silicone paper, the actual adhesive film and the transfer paper. Before sticking, the silicone paper must be separated from the decal and transfer paper. To do this, place the sticker with the transfer paper side down on a flat surface, and then carefully pull the silicone paper off. Never the other way round. This is the only way to ensure that all small glued parts will remain on the silicone paper. After sticking on the vehicle/object, leave the transfer paper on the sticker for some time (approx. 10 min., in the case of wet application > 20 min.). This prevents the foil from lifting when the transfer paper is removed and prevents formation of bubbles. Please note that when applying to a vehicle, final adhesive strength is achieved only after 72 hours. We recommend waiting at least 1 week before visiting a car wash (in cold ambient temperatures even 2 weeks). If you follow the above instructions, you will enjoy your stickers for a long time!
Trustpilot
2 weeks ago
1 month ago
