Blue Wave NL102-26 48 in. Peel and Stick Above Ground Pool Cove - 13 Pack

Installed easy, thought it was gonna be enough at the last piece but it fit perfect even having to cut 4 inches of very last piece.Great product, worth the price

What a product! With someone else helping, these were installed in my 24' above ground in less than 5 minutes - that's not an exaggeration. I have done a few pool liners over the years. I'll never do another without this product. Far superior to a sand cove, and super consistent. It made for a great finish for my latest install. What I liked best was knowing for sure my sand floor is flat, because I could see it meet the wall instead of burying that intersection with sand and hoping it was right.Pro tip: Peel the adhesive backer about 6", and fold the backer piece straight up, press the cove into the corner, keeping the cove tight to the floor and the pool wall with one hand, pull up on the backer with the other. Do this about every 12 inches as you go, and you will install every piece perfectly and quickly. The backer is super sticky, you don't want to have to reposition if you don't have to.If you have a 24' round pool, buy the 24' round kit. I read several reviews about this coming up short and was worried. I have a 24' round pool and I ended up with an extra 1.5 feet. I imagine oval pools could be an issue though, so pay attention to reviews specific to the pool size and type you have.

This works perfectly - saved a mess as I didn’t have to use sand to make the cove. The glue is just sticky to be able to be moved but hangs on when you’re done.

Quick delivery and there were 19 in the box of 19. Great adhesion to my pool wall and easy to install. Beats the heck out of making a sand cove. Time will tell if they will hold up to the pressure though... I have high hopes.

Very good product for protecting liner. It is far superior to having sand barrier around the base.

If you have a beveled or wavey pool wall, you will need extra adhesive or tape as shown. Even though I had to use extra, I loved the design and effect/support. Worked great on straight and rounded ends. Would buy it again. I used spray adhesive with some duct tape to hold it in place. Again, this was my choice.

I like the peel and sticks a lot better than slotted into bottom frame. Easier to Deal with. Same result

Saved a lot of time using these, looks a lot nicer than sand cove did. Was concerned about adhesion, so I cleaned the pool wall first, then applied them, they stick really good !

We purchased our pool in the summer of 2022.They recommend you use these To help keep the force of the water from the bottom edge of your pool.Really no difficulty putting them in as they come with an adhesive on them. Just make sure if you're Putting the Waveless foam on the walls that you stick the bottom of the insulation To the wall as well as the top. Otherwise it can be difficult to put this edge in.Overall it does what it's supposed to do.

as expected

Work very well

These saved a lot of time when installing an above ground pool. Fast efficient delivery by seller. Good quality for reasonable price

The product was easy to install- especially compared to shaping sand. Only bad thing was that a few of the pieces seemed to have too little glue and did not want to stick easily.