Woolley Zigbee 3.0 Smart Plug, Mini Outlet Socket Compatible with Alexa, Google Home and eWelink App, 13A/3120W (Hub Required) 4PCS

Small size and reliable Zigbee device. Have integrated 8 so far into existing Zigbee mesh network. Using SONOFF Coordinator, Home Assistant running ZHA.No drops or disconnects, acts as a reliable routing device in the mesh network to reach to far away end devices. Home Assistant ZHA recognises immediately and pairs no problem. Simple function (on or off or toggle), use in automations and scripts with no issues. Good price.

At £12.5 per item, these are a bit better value than many. I paid these with Zigbee2MQTT and a Sonoff USB controller, they reported as a eWeLink SA-030-1. You can turn them on or off, and set the power on behaviour, that's about it. They act as a router in the mesh network, which is handy.They don't seem to be able to bind directly to anything, which probably is fairly niche for a socket, and there is no OTA firmware update support.But they seem to work just fine. I had a couple of incidents of a switch going off, which made me paranoid, but that stopped and I'm not entirely sure it wasn't user error. They have seem reliable during the time I've been using them.It would be nice to have power monitoring in these.

Used with home assistant and ZigBee dongle. They work perfectly. Good build quilty. No power consumption monitor but then I guess that's reflected in the price.

I got this to connect to my smart home, a day after installed, the zigbee network start crashing. Made sure all the updates were done but didn't made any difference, zigbee network continue crashing after a lot of investigation, I disconnected the 3 plugs that I had installed and no more issues. Zigbee network was running perfect. After couple of days with no crashes, I installed one plug to see if was a one time deal, right next day crushed. Then I plugged a different one ( could be only one plug faulty) and same happen all the time. Crash after crash.Don't recommend it.

Unfortunately the main purpose I purchased these for does not seem to be functioning. I am running Home Assistant with Zigbee devices configured using ZHA and a Sonoff USB dongle. At the time of writing, ZHA cannot read the every usage from these switches. The base switch functionality works fine though so I believe the hardware itself is fine. just lacking support in ZHA.

I've now been using these for a few months and have had zero issues. They work great as a smart plug, they route my edge devices through them and work great with Zigbee2MQTT. Nice little form factor compared to some of the bulkier devices too.

These were purchased primarily as Zigbee range extenders for my smart home devices. For this purpose they work very well, and they are among the cheapest devices out there for doing this. They were very easy to install (they paired immediately on switching on, or you can hold down the button for about 5-7 seconds) and they seem to remain connected reliably so far. The signal strength isn't as good as a dedicated router device, but it is fine as a mesh density extender device.There are two cons to the device, both if they are to be used for actual smart plugs. Firstly the button remains green when there is power to the plug, and it doesn't change colour when the smart plug is turned on or off. This is a fairly fundamental design flaw I would think, and there is no reason why it doesn't either change colour or turn the light off then the plug is off.The second con is that there is no power monitoring on the device. This is a minor annoyance, because having found a decent smart plug which will extend the range I would have liked to have used it for my permanently switched on appliances such as washing machine etc., and monitored the power usage on these.If I don't find a better device, then I would consider buying these again.

These are easy to set-up and work as routers for your Mesh system.