NEIKO01379A Master Screwdriver Set, 32 Piece Magnetic Precision Screwdrivers, Phillips, Flathead, Slotted, and Torx Drivers, Includes Magnetizer and Demagnetizer, Small Magnetic Screwdrivers

As an electrician codes and standards change. One new change coming stanard is torque requirements on electrical connections on devices, equipment, and circuit breakers. For me this is my first purchase of a torque screwdriver. I have a coworker who has one that's quite nice but it's was pretty expensive. After looking around I spotted this one, it was one of the cheapest options with decent reviews. Once I got it I took it out and began to get familiar with it and get a first impression. When I set it down I was happy that I didn't buy the other expensive one. The pictures don't do the quality justice. After holding this screwdriver it's actually quite well built. This is not cheap flashlight plastic. This plastic handle is of the same kind of high quality and extremely durable plastic used in Ideal and Milwaukee screwdrivers and reamers. The torque selection gage was not hard to read, easier than the tiny writing on the more expensive one. The target is changed with a spring loaded selection knobs at the end of the handle. It has notches to lock the settings you select. To adjust just pull and twist to desired torque. When I select a setting the knob snaps back down lock in place. The lock works perfectly so far. The selection knob gets harder to turn as you go up on the torque selection. It was possible to adjust to the max range, with quite a noticeable increase in resistance at the torque increased. It comes with a ton of bits so finding the one you need should be no problem. I took it outside and tried it out at 20lb a common torque for light switches and receptacles. The screwdriver worked perfectly. Once it reaches the 20lb it engaged the clutch and will not turn the screw anymore. Went to 30lb and clutch did its job again. So the screwdriver will not overtorque screws. It did what it was supposed to. It got those screws to 20 and 30lbs and stopped. What I can't talk about is accuracy and calibration. I did not have any method to compare the accuracy of this screwdriver. There is no calibration sticker on this screwdriver. It does come with a fancy sticker with a long serial number on it displayed right above the made in Taiwan sticker. I feel better knowing this was made in Taiwan. I've had great experiences with tools made there and I still own them. While not as good as American or German steel, Taiwan steel is quite high quality itself. The differences can only be seen in conditions well past what a human can do to them, and have to be broke under powered mechanical operations sush as hydrologic presses on pliers. I'll tell you what for a torque screwdriver that's half or a third of the price of others I've seen listed, this is a really nice screwdriver. I'm glad I have it. My boss is happy to see me with now. So far I don't feel I'm missing out on quality or operation with this screwdriver while working in electrical panels and light switches I've done so far. The cherry on top and proof this screwdriver is made for a job site is that it comes with a tough plastic carrying case that is more than capable of protecting the screwdriver from damage if tou drop it.

I've got plenty of large torque wrenches but this my first screwdriver style.I'm so impressed with the quality and accuracy and honestly, I wish I had purchased this. years ago.Terminating breakers now is so extremely easy and the results bang-on perfect. You know the routine... Torque, loosen, torque again. This allows the stranded wire to be set firmly and securely and just in case an inspector should test the termination, he'll be pleased to see everything is perfect.

I work as a display installer, and I found this tiny ratchet to very useful. Especially when you're working in a small tight space where your larger tools won't be able to access. Great tool to have.

Had mine for 2 years, used extensively and hard and it just keeps working! Great tool, great value, a lot stronger than it looks.

There aren't many applications that demand this low a profile, but when needed this is perfect. No bells and whistles, just a very compact effective screwdriver.If you're going to be installing door knobs this is the best tool I've ever used for gettting the correct angle under the knob.

Worked perfectly for my project. Good quality and very easy to use. Nice kit.

Basically I only bought this set to do one job that I needed a T-6 for, as I already have pretty much every other size this kit includes. I thought a full kit would be handy to keep in my truck toolbox as I regularly perform maintenance on my company's equipment, so figured I'd jump for an economy set and keep my nice Snap On drivers safe at home.(It should be noted the job specifically was putting new scales on my Benchmade 535, and the screws weren't very tight at all but did have a tiny droplet of blue loctite on them, but didn't appear to generate any real resistance to unscrewing)As can be seen in the photos, these tips are not hardened. In fact, they're very soft. The T6 driver only made it through loosening all 10 T6 screws (two sides and belt clip) at which point I noticed the flutes on the bit were beginning to bend and spiral. After swapping scales and getting all screws loosely installed, I was only able to snug down 4 of the 10 before the bit began slipping in the sockets. The good news is, the flutes bent themselves back to straight after snugging the 4 screws down. The bad news is, my knife now has a bunch of loose screws.Fortunately, the only metal shavings I was seeing were from the tool itself and not stripped screw heads, but this T6 driver is already junk after its first use, and now I'm off to spend more money finding a worthwhile T6 to finish the job.Oh, and magnetism is non existent.Ultimately, 3 stars because it's a comprehensive kit with a case for a low price.. but don't expect much out of the small sizes as the material is very very soft.

Comes in nice case. All the different sizes. Good quality definitely recommend

La calidad se ve buena por el precio y el estuche es un plus.

Produto conforme o anuncio.Ferramenta muito boa se você souber usá-la.Ela não foi feita para desmontar motor de caminhão!É uma ferramenta desenvolvida para pequenos reparos em móveis, eletrodomésticos e etc.Eu uso no meu EDC, pois já me deparei com situações onde eu senti falta de uma ferramenta dessas.Dica: troquem os bits que vem com ela por bits da gedore tamanho médio.

Es la cosa más útil del planeta cuando tienes un tornillo sin ningún espacio para meter un desarmador normal. Porque, además, son como llavero y puedes sacar una sin andar agitando las demás. 10 de 10.

Se ve bien

Me gustó mucho y se ajusta totalmente a lo que ocupo