Tripod Carry Bag Pad Package Great As A Carrying Case For Your Tripod In Outdoor/Outing Photography Bag (65CM)(25.6" × 4.7“

A nice bag for my tripod. The bag has a tough nylon exterior, and a smooth nylon interior, both one piece with no seams except for where the end pieces were attached. The seams are wrapped with small nylon strap material so no frayed edges to come apart in the future. A firm foam pad, about 3/8" thick, goes all the way around and runs full length of the bag. No stitching was done through the pad so no thin spots. There is even some padding on the ends. The double zipper looks bullet proof, the metal D rings are well attached, and the nylon handles are made from a single nylon strap going all the way around the bag, so not much chance of that pulling loose. The zippered pocket sown to the inside of the bag measures 5.25"x8.25". Two sets of straps, attached to the inside bottom center of the bag, are more than long enough to tie down any gear you could fit in the bag if needed. The detachable carrying strap looks nice, seems to be well made, and is adjustable, but I never use these. Seems like a tough bag and just under 10oz without the strap.

I purchased this bag (55CM) to carry my Gitzo GM 4562 monopod with Kirk MPA-2 tilt head attached, and it fits perfectly. The material is a heavy nylon with moderate padding, and the zipper seems strong, unlike those on some other low-cost bags. This bag is very plain-looking - it doesn't scream "expensive gear inside". Compared to tripod manufacturers' bags at 3 times the price, this is a great deal. I recently purchased the 90CM bag for my full-size RRS tripod with ball head. It's just as well-made as the smaller one. The handles wrap all the way around the bag so no worries about them ripping off. The shoulder strap is 1.5 inches wide and has a non-slip pad and metal swivel hooks. There are tie-down straps inside to keep your gear from sliding around. Highly recommended.

I bought the 70 cm bag with normal height, not the 70x16 bag.It is a perfect fit for a Swarovski Tripod 1 with Fluid Pan Head attached (see photos).The tripod + head combined length is 26 inches.The widest point of the head is 6 inches but the rest of the tripod is narrower.The fit is a snug at the widest spot, but the rest of the bag has some slack.I'm happy with the fit and function - good padding, easy access, easy to carry, inner zipper, tie strings.The zipper is plastic with metal pulls and might be an area for concern long term.Overall it seems well made, but only time will tell about the longevity/durability.Since this comes in a variety of lengths and widths, you should be able to find one that fits.This bag is made in China (see photo).Given that it is just a long/narrow duffel bag with padding, it is probably not worth the $28 that I paid.But considering the value of the tripod, this bag is the best fit/function I could find and I hope it lasts a few years.

An outstanding value for the dollar. Is generously sized within given measurements. Has premium hardware, internal no-spill ties, and a modest mini zipper pocket on the inside. Would have loved a bit more wall padding; however, I decided to use it with a lighter synthetic tri-pod and switched out my heavier case for a more sturdy and heavier metal tri-pod. Is an excellent product for my lighter tri-pod and will work well with the heavier one, any day. The strap and shoulder pad is better on this one than my more expensive carry case. Am a bit spoiled with another discontinued product procured on sale about a year ago.

I purchased this tripod carry bag to store a Wolf Rivers TIA antenna. I purchased this bag because I also wanted to put a MFJ-1979 telescopic antenna in it. The 1979 is 27 3/4" long and fits nicely in the bag. The bag is well made with a small zippered pocket on the inside for other items. There is a little bit of padding in the lining and should provided some protection. I'm easy on my equipment so it should suffice. The bag also has two straps on the inside to tie down the antenna parts from banging around. There's enough space on the inside to also put all the counter poise wires I need in it. I now have an easy to carry vertical antenna for field/portable work. Did I mention the item came in the mail in two day's :-)

I noticed the seller advertising the carrying case had extra padding but expected that claim would not be true. I was wrong, it is a well-built case. Not a cheap thin case that comes with most tripods. Also, it appears the zipper system is heavy duty and should last. When I first tried putting my Manfrotto tripod inside I was very disappointed that it would not fit. The length was correct but the case diameter was too small. It seemed that the twist locks were getting the way of the zipper. After thinking about it I decided to return this one and purchase the 90cm but didn't like the fact that it would be about 5 inches longer than I needed. Then I realized I could simply loosen the screws and turn the knobs 90 degrees to lessen the overall diameter. Now it fits like a glove. I'm giving it a 4-star rating for durability, only because the case is brand new and hasn't been tested yet. Great product. Will buy more when needed.

I purchased a pro ring light through my local pro beauty supply store and it only came with a carrying case for the ring light itself. I had to purchase a separate carrying case for the tripod and found this one. It arrived the day it was supposed to (but over an hour late as the time specified) however, it is worth every penny thus far. Good construction, and material. It’s nicely padded and has an interior zipper to hold accessories (I used it to store the camera shoe, cell Phone holder, and the extra fuse for my ring light). It also has ribbons sewn in the interior to tie your Tripod in place. The zipper is smooth and doesn’t feel cheap. The most important test though is durability. It seems sturdy enough but I’ll update my review after I use it for a few months.