PrimaCreator PC-120-BL-EU P120 v3, Blue

Link to spare Microsd memory card - works better than original.  Transcend 2GB Micro/Transflash SD Card We are manufacturing parts for a scaled up and functioning medical prototype. Our printer got 4 days worth of adjustment to set it up correctly and then its has made 100's of good identical parts. This unit with Verbatim filament (we are using Polypropylene filament which is difficult to get started) works very well. The one thing I did was re-write the printing initiation to properly purge, clean the "tip", prime up, and then print. This makes it a piece of cake to run.Polyprop needs sellotape or parcel tape onto a warm 50oC bed, all parts stick perfectly then. Too hot and the sellotape will come away. I know sellotape is spelt wrong.G21;(metric values)G90;(absolute positioning)M82;(set extruder to absolute mode)M107;(start with the fan off)G28;(Home the printer)G92 E0;(Reset the extruder to 0)G0 Z5 E25 F500;(Move up and prime the nozzle)G4 S3;(Wait 3 seconds for the filament to flow out)G0 Y1 X-1 Z0;(Move outside the printable area, drop the nozzle into cooling polyprop to clean it)G1 Y60 E29 F500;(Draw a priming/wiping line to the rear)G1 X-1;(Move a little closer to the print area)G1 Y10 E31 F500;(draw more priming/wiping)G1 E30 F250;(Small retract)G0 Z2 F500;G4 S0.5;(Wait 1 seconds for the filament settle)G92 E0;(Zero the extruder)BAD thing: aluminium plate vibrates a bit, the height setting is a little crude (buy a digital caliper) but you will only need to adjust it if you move the printer or rebox it. Its just a niggle.

i loved it,but kept blocking up ,then the cable kept coming off,dissapointed ......

Good printer a good price but unfortunately I have a few problems with the access and excluder not feeding correctly or not feeding at all I did have three of these But unfortunately the same problems but when it prints the prints its very good And the price is good

The only problem is the manual is hopeless - I got my cousin to remote from Malta to help me set it up. I've had a great deal of fun with it since, everywhere is covered in small models. Once you know what you are doing its easy to use.