Fix Shaky Wall fixings. Make existing Wall Plugs Secure. (4 x 5g sachets)

Needed something that would hold a curtain rail when the rawl plugs wouldn't hold due to the plaster crumbling when I drilled into the wall. This product was so easy to use and did a great job. You have to work quickly and it is bright orange but it holds screws firmly in place and really did make a frustrating task really easy to complete.

First off the product works.Boil water drop in the balls and 1 minute later you have a putty.You need less than you think. I filled several large holes and managed to reincert plugs.But why on earth is it orange! Bright orange at that. It took 4 coats of paint to cover it.Change the colour it's 5*..

Loved that this easily fixed a hole made by the curtain pole fixings being pulled out (don’t yank the curtains please kids! ) so pole could be screwed back onto the wall in the same place.Only thing I didn’t like is that product is bright orange so stands out and needs painting over, which it wouldn’t have if it was a neutral colour like white or cream, or even black. Only a tiny fraction was visible after putting the bracket back up over the top of the repair, but it is eye catching, being bright orange.However, the product is super easy to use and very effective, it seems super sturdy and was a cheap and easy fix. Would buy again if needed but there was more than one sachet in the box so won’t need to buy again for a while.

I had a wall plug come out of the wall (see the 1st photo) rendering the curtain rail bracket pretty wonky. The wall plugs were probably the ones supplied with the bracket, long enough for some kind of a perfect wall. My wall is not one of those. The plaster is quite crumbly. I applied a belt & braces approach: I made larger much deeper holes for a longer plug (and screw), but the entrance of the two holes was a right mess, needed this product. I used only one sachet to make good two holes. This was only possible due to the fact that I inserted two quite large wall plugs into the pliable mixture. I could make slight adjustments to the positioning of the plugs while the mixture was still warm, so that they aligned well with the holes in the bracket. OK, the bracket is not perfectly vertical, please see the 2nd photo, but the mess that I had to deal with was epic!In the end, there was a bit of a hole that needed some filler applied to it, but the mixture held the plugs very firmly in place. Total success!

Brilliant, simple to use, worked exactly as described.I really can't say more than that.Pros:- Cost- Ease of use- Very effectiveCons:- Quite brightly coloured may look obvious in some locations- Hardens fairly quickly, so you need to be fast

Used this to rehang a curtain rain. Worked perfectly but you need to work reasonably quickly as the product does not stay pliable for too long

I bought this to fill a screw hole on a kitchen drawer but found it terrible to use. Once heated it didn't remain soft for long before it hardened and became unworkable. I tried it several times diligently following the instructions but gave up and threw the remaining sachets in the bin. Don't waste your money.

This saved my sanity. Trying to get 10mm plug with 8mm screws into a 100 year old wall to hold up a heavy monitor. Two holes on the bracket were so close that they collapsed into each other once drilled. This stuff comes together very quickly once heated and cools very quickly as well. I estimate you have 60-90s to get it in and get the plugs embedded before it's too hard to work. Both once set, it does not move and the screws bit nicely. Highly recommended.