Corner Grips for Irwin Mini Quick Grips Pair (2) Right Angle 3D Printed Clamps Quick Grip Hand Tools Clamps For Woodwork Compatible with Irwin Clamps Small Clamps Wood Clamps Woodworking Clamps Clamp

After purchasing these corner grips, realise I needed the clamps so ordered the ones Irwin say they fit, they don’t. Emailed company have had no response.

simple to use

Good idea but they don’t fit the clamps! I had to sand them back to make them fit.

These 'Corner Grips for Irwin Mini Quick Grips Pair (2) Right Angle 3D Printed Clamps' are a great idea and I am a little annoyed I hadn't thought of printing them myself.The are well printed and quite robust and fit on the Irwin minis very snugly in place of the yellow jaws that you have to remove.You can get a mediocre clamping force which actually holds quite well, however because the corner isn't a perfectly sharp 90 degrees you are always pushing into an imperfect angle. The design could be made a lot better by have a small relief on the angle which will all for perfect or slightly under 90 degree angles to be clamped perfectly.For £11.99 this is a pair of decent angle clamp attachments, I would describe it as heavy duty and heard it creaking when I started adding the beans but they are up to some light duty clamping.I will be Dremelling out the inner angle to ensure I can get perfect clamps, but they are fairly decent as is.

Only the corner grips arrived without the Irwin clamps.

Printed in what seems to be a decent quality PLA, the surface finish is pretty good and no signs of any likelihood of delamination from the layers.These corner clamps are designed for LIGHTWEIGHT applications and will not apply the same level of clamping force as the original Irwin rubber feet, unless you are happy to face the potential for them to break apart.For aligning corners of a cabinet before fixing with screws or pin nails when glueing, these will do the job but I'd hesitate to do much more in terms of heavier weight applications.If there are any issues down the line I'll update the review but happy to recommend for now.

Very useful adapters for corners. I used these to hold a cabinet together whilst the glue dried and they worked as advertised.