Homebrewers OutpostD1514 Keg Coupler - Low Profile Elbow Bend

Upgraded my kegerator to fit a half keg and my setup barely fit with the beer line pinching slightly. This is very solid, no leaks, works great, and added a few inches of wiggle room between the top of the keg and the fridge.

I guess the negative reviews were for the old model? I just bought 3 of these for my triple tap Komos kegeraror and they seal flawlessly! Highly recommend. Made my life so much easier with the duotight fittings and lines getting kinked and leaking on me before.

Threads and product were well done and fit perfectly.

The thread hole is too deep. You must find a thick silicone washer or stack two washers to get a proper seal. I used the latter solution, and it fixed the leak.

Worked perfectly and eliminated the issue I had when using a purchased 1/6 keg in my kegerator!

This is excellent for shorter kegerators. Especially if you want to convert from a standard beer nut to a corny liquid ball lock. The liquid ball lock adapter + the ball lock connector get too tall for most standard kegerators. Add this to the keg coupler and everything works great!

I use all Duotight fittings in my custom 4-tap Beverage Air BM23. I have no clearance issues for my home brew using ball lock corny kegs, but for the first time in years I ordered a 6th of Stella and purchased this in case there was a clearance issue. Glad I did.Only issue I had was user error. I did not crank it enough to allow the lever on the coupler to completely retract, and when I tapped the keg it opened up before the coupler was fully set and spewed beer. Realizing my error, I cranked just a bit more and no issues. No leaks. No pour issues at 12psi.

I have a D System keg coupler, but the kegerator is not high enough inside for the coupled keg to fit. This makes a 90 degree angle and now it fits. Solid chrome plated brass -- good item that should last forever.