💡 Light Up Your Life with Confidence!
This 4-pack of Light Bulb Starters is specifically designed for Flowtron models, providing reliable current to ignite your fluorescent tubes. With a lifespan of 5000 hours and compatibility across various models, these starters are the perfect solution for efficient lighting repairs.
| Light Source Operating Life | 5000 Hours |
| Is Electric | Yes |
| Light Source Type | Flourescent tube |
| Accepted Voltage Frequency | 100 to 240 Volts and 50 Hertz to 60 Hertz |
| Light Color | black |
| Voltage | 110 Volts |
| Light Type | Fluorescent |
| Special Features | provid the current to start the bulb glowing |
| Bulb Base | Prong |
| Specific Uses For Product | repair ballast |
| Item Weight | 0.1 Pounds |
| Package Quantity | 1 |
| Unit Count | 4.0 Count |
| Material Type | Glass |
B**N
Worked perfect on my Flowtron BK-80D
I was a little nervous when I opened the package and there was only one little box inside. I thought I only got one igniter. But inside the box were four igniters. The BK-80D has two bulbs. One of my bulbs was not lighting up. I swapped around the bulbs to confirm I had a dead bulb and one side of my bug zapper wouldn't light up my good bulb. It is probably not the best idea to pull the bulbs out of the bottom of the unit by the glass bulb part. Because I pulled the glass on the bulb, the glass part of the bulb let go from the plastic housing base where the connectors are because it is an old bulb. It still worked but is not ideal. Don't be lazy, just unscrew the other four screws so you can easily get at the base of the bulbs. Anyway, I bought a new bulb but which worked on one side but not on the other. I bought these igniters to replace the side that wouldn't light up.All you need to do is take off the black plastic top cover (1/4" socket or flat head screw driver) two screws. Look to see which bulb socket corresponds to the bulb that doesn't light up. Using a needle-nose pliers pull out the old wires for the dead igniter. Mine were in there pretty tightly. Be careful not to rip out any other wires that go to other things. Use the needle nose pliers to insert the new igniter wires in the same holes. You will feel the socket grab the end of the wire so you know it is seated. Put the plastic top back on and test. Boom. Fixed. You are a hero.
J**N
Easy Repair
Starters work great and quickly got my zapper bulbs working again. Will buy again.
P**R
You get what you pay for.
I received my order on 8-26-2024. Three of the starters were new but one was a used one with a broken wire. I say used because the ends of the wires were twisted like from a wire nut and more of the wire was exposed on that end. The broken wire is where they come out of the starter bulb. Also where the fine wires are crimped to the heavier wires, the connection is loose.
B**N
Worked
I added tape to exposed wire to keep from touching. Pulled out old installed new and light came back on. Have extra to save for next time.
C**.
Terrible quality!
I was sent burnt out bulbs and the wiring is extremely weak and low quality. Not happy!
E**W
Worked!
Works as described!!
T**N
Worked for Flowtron Zapper
Quick and easy fix for my bug zapper that stopped lighting up.
Trustpilot
3 weeks ago
1 month ago