Size Name:Cutting diameter:30mm-120mm;30mm-200mm;30mm-300mm Specification:Material: Alloy SteelColor: BlackCutting diameter:30mm-120mm, 30mm-200mm, 30mm-300mmCutting thickness:3mm-50mmFeatures:Heavy-duty woodworking construction with longest tool life.Having adjustable two for sharp blades on both side of the measure-bars - Adjustable Plane type design 2 Changeable Centre bits for thinner or thicker materials freely. Dual blade design for faster, cleaner cuts.Can be used cut many kinds of materials, such as Plywood, Hardwood, Laminates, Composite, Rubber, Plastic, etc.Set of Cutter + Blades + Centre Drills. Comes with Hex Key and Center Drill Bit.How to Use:1.set both cutting-blades on blade-holders tightly and correctly as shown in figure in correct.2.To adjust the size locate the inner edges of the blade holders against the size graduation.For example number "40" for a 1(40mm)dia.Hole.3.Set 2 blade holders at the desired graduation on the measure-bar by tightly screw-in the hexnuts using L-shape hex wrench.4.Use the chisel end drill when boring thin wood while use the twist-drill when wood is thick.5.Before boring,hold 2 sides of veneer of timber firmly by stepping the twist-drill or chisel end drill at the center of the desired hole.When using power-drill,be sure to contact the cutting blades gradually and slowly on the object to be bored.Abrupt contact of the blades on the boring object can give shock to your hands.6.When deep boring-1"(25mm)up to maximum 2"(50mm)-is desired,use the device from one side of timer,and then start boring again from the other side until the cutting blades bore through a hole making it-shaped disc. as shown in figture.7.By way of using optional measure-bar.large hole with maximum diameter of 8"(200mm) can be bored.Package Included:30mm-120mm, 30mm-200mm, 30mm-300mm Adjustable Circle Hole Cutter
A**R
Not suitable for purpose
Even working with softwood and at the recommended speed (less than 800rpm) this "cutter" ripped and splintered the wood when trying to cut a 100mm hole. Returned for refund. Avoid this product.
J**Y
Happy
I haven't had chance to use it yet, however it looks the business. Well worth the money.
H**L
Handy hole cutting tool
Just what I needed and works great
T**D
Returned
Returned product quality felt inferior
"**"
Ease of use
Great little tool. Needed something like this for pipes to fit through. Will recommend.
B**S
Not perfect but functional.
It’s does the job but could be better. Everything works as expected except the drill bit is not centred. When you try to cut a circle te drill bit rattles the hell out of the wood because it’s off centre. I pre drill and then measure a ton to get the cutters centred on the hole. Then it works as desired. You get what you pay for but with some effort this cutter does the job.
M**8
Klasse nur der Bohrer ist Müll
Klasse ein wenig Nacharbeit und alles Stimmt. Die verarbeitung ist supper. Die schneiden fühlen sich richtig scharf an. Sie stehen auch im winkel zum "ausleger und der zum Bohrer. Einen stern muss ich aber dennoch abziehen. Und zwar was gar nicht geht ist der Bohrer wehre ich kein ausgebildeter Schlosser würde es zurück gehen. Die Schneiden am bohrer sind Ausgeglüht und dann noch nicht einmal richtig geschliffen. Normalerweise geht die fläche nach der schneide nach hinten und oben und bildet somit einen Kanal um die Spähne abzufürdern hier ist es genau anders herum und an der schneide ist noch dazu ein fetter Grad. Also neu anschleifen und gut oder eine entschrechenden "guten" Bohrer einsetzen aber der ist fehl am platz.
A**E
Schrott
Gebe es null Sterne, würde das Teil null bekommen. Sehr gefährlich. Beim ersten Schnitt in Weichholz ( Kiefer) sind mir die Schneiden fast um die Ohren geflogen. Alles total verbogen und der Schaft hat sich so in der Bohrmaschine verkeilt,dass er nur noch mit großer Mühe zu lösen war.
I**P
Use with drill press
This jig works if used in a drill press. Free hand cutting is difficult although I managed to cut 6" holes for LED lights in the ceiling. Expect a lot of dust.
M**E
Great tool for the price
Have to be careful when freehand drilling but otherwise does what it is meant to do. Great tool for the price
A**E
Nach dem Test
Dieses Gerät ist ja nicht schlecht für einfache Kreise ins Holz.Weniger hat gefallen; Einstellung über die Skala nicht genau da die Gebrauchsanleitung fehlt.Abweichung ca. 5 mm.
K**N
Decent for the price.
Cutters are not rigid enough. Got to clean up the circles on the lathe. Decent on soft wood but not on hardwood.
G**.
Good stuff.
Works well. It does a good job.
H**B
Recommended
Not bad at allVery well made and impressive
A**O
ottimo materiale
taglia perfettamente.
B**S
Quite hard when using a hand drill, kicks back. Be very careful when doing that.
Not easy to use on a hand drill...
A**R
👍🏻
Love this tool
G**O
Difficoltoso all utilizzo
Restituito perché pericoloso a parer mio
B**D
Das taugt nichts
ein herumschlagender Kreisschneider zurück geschickt
H**R
bien !
Bien mais diamètre de coupe un peu limité
Trustpilot
1 month ago
4 days ago
