Patiowell 10 x 12 FT Metal Storage Shed for Outdoor, Steel Yard Shed with Design of Lockable Doors, Utility and Tool Storage for Garden, Backyard, Patio, Outside use, Gray

It took a while to put together, but was well worth it. Once together it was very strong and I was able to move it by my self to the final location.

This 5'x3' shed is surprisingly good quality, and I think a bargain for $125-ish. Here are my thoughts after the install:PRO's:Very affordable.Every single hole except the two tiny little overlapping holes on the middle roof panels lined up. I had to re-drill those 2 holes - no big deal.Door hang perfectly level.Instructions were pretty easy to go from - except for the RH and LH door frame parts and the top and bottom door reinforcement ribs (see CON's for more info).No missing parts, even had a few extra fasteners.Looks good after assembly, finish pant durability yet to be determined.Structure is surprisingly rigid after tightening down all the screws.CON's:Instructions (drawing detail) was not clear enough regarding the top and bottom door reinforcing ribs, just too dang small, I even used a magnifying glass to try to determine the orientation.The manufacturer put the door frame labels over the protective plastic, so when we tore off the plastic, we lost track of which side was LH or RH. After some trial and error, got it figured out.The protective plastic wrap. OH my .... what a colossal pain in the rear. I had seen a couple reviews saying it's a 3-4 hour install. I call BS on that. It took my wife and I about 7 hours and other than the two "problems" mentioned above, it went well. I even used an electric drill for all the fasteners.There were some dents in the metal, about half way up from the ground. I'm assuming from the package being palletized for shipping? I did not notice any damage to the box. Instructions say you can "fix" the dents with a pair of pliers - good luck with that. This shed is not in my back yard where I would notice the dents on a daily basis, otherwise I might have complained, and I did not get to put it together until well after the return period.It did leak a little, but it was a hard, driving rain. If you have something in it that MUST be kept dry, then bag or containerize it.Install tip - do not tighten down ANY fasteners (other than the bottom frame after making sure it's square). Put everything together, then go back and tighten all the fasteners. I believe that is why 99.9% of the holes lined up.Despite the CON's, I'd still recommend this shed. Just allow at least 6 hours to assemble, unless you don't care about removing the protective plastic wrap.

For the price, this is a solid value. The design is well done and all parts fit as they should ( as long as you follow instructions). The instructions are wordless with each step shown by drawings. For the most part, they show what is needed. Took me about 5 hours total to build, working alone. This included building a base for it out of 2*4s and exterior plywood. The panels are light gauge galvanized steel. They may seem flimsy but are rock solid once all parts are together.Some tips-If you are not used to working with your hands, do not do it alone. Have a partner to help.Build a base and anchor the shed to it once the four walls are up. Make sure it’s square and the rest of the build will go smooth.The shed will blow away if you don’t anchor it ( as suggested in the instructions) using the screw holes provided.

DO NOT BUY!!! If I could give 0 stars, I would. Some of the panels are dented which I expected and was willing to look past. Instructions are no good. They are all photos with little explanation. I take my time with every step to ensure the best possible results and all that effort still doesn’t matter. The holes in the pieces do not line up properly which causes misalignment in multiple areas. One of the corners doesn’t even close at all. Some of the screw holes are the wrong size and will require additional screws to be purchased. This now causes all corner braces to be useless. I’m currently putting the roof together and I’m now questioning if I’ll even be able to complete the shed. The provided holes do not align correctly, which means I will have multiple holes in the roof *IF* this ever gets completed. I don’t mind drilling my own holes, however having extra holes where water can continuously leak in is unacceptable. I don’t know how to return this as I’ve spent all this time putting it together to this point but I need a refund! This is my worst purchase in years! You’ve been warned! Stay away from this shed. You WILL NOT have a good result. Complete waste of time.

I bought this shed to cover our well up at our recreational property. We had to get a new well and it had to be outside the old pump house. This shed was the perfect size to cover the well and pressure tank.The box had no signs of damage from shipping. When I unboxed the shed parts almost every steel panel has damage in more than one spot. I needed to cover the well components so i built the shed with the damaged panels. Plus there is no way i could have ever got the pieces back in the box to return it.The shed looks great and will do a good job protecting the well components. The instructions could have been a little clearer at very important spots. I had to disassemble parts a few times because they were backwards. The instructions could have made it clear what direction the piece went instead of having to stare at the drawing to see what direction the part goes.The shed is very sturdy and most of the panels paint surfaces were protected by a plastic film so the paint would not be damaged. It was a pain to peel all that plastic off but it did protect the paint.All the parts fit together well and the pre drilled holes lined up. The metal is a nice thickness and i think it will last years.I am very disappointed in all the damaged panels.