CLC Custom Leathercraft 5023 Deluxe Cordless Poly Drill Holster, Black

Great product, thank you.

Just what he was looking for and needed. Affordable and durable!

I ordered this sight unseen hoping for my ideal drill holster, and it works well, but not the best option for me. I looked at the dewalt, this one, the Home Depot Husky brand and the Lowes AWP brand. This was the only one I couldn't at least put my drill in to test the fit.Dewalt and Husky didn't fit my Dewalt dcd995 very well so they were out. I then alternated between this CLC and the AWP for a 12 camera security system install on a home.Fit and finish on both were nice, but this does seem better built. Both have Velcro strap retainers and plastic clips that are secure and effective. Both grip my drill firmly, reholster smoothly and hug my hip nicely. Both are easy to withdraw my drill from.The kicker for me was the elastic straps and pockets on the AWP are much more useful. This CLC has several closed bottom elastic pockets for 1" driver bits, useless to me. I drive with a driver and drill with a drill. There's just no useful accommodation to carry anything but the drill with this holster. The AWP has more open bottom pockets that hold drill bits securely, and an drawstring pocket for small items like screws or in my case fish rod tips.All in all it's a good holster, and experience leads me to believe it'll likely last longer than the Lowes brand. If you carry your drill everyday though, it's worth the few extra bucks to buy a few holsters to see how they'll feel in real life use.

holds my dewalt nicely

I believe this would hold any impact driver and probably any normal drill. It holds both my porter cable 18v impact and drill driver, and they are a little bigger than most other more expensive drills (like dewalt, makita, etc). And it has no problem holding either drill regardless of whether i have the big nicad battery on it or the lithium ion. This should fit in any belt loop unless you have some giant belt that I've never seen before.Also note that this holster has an opening at the bottom where the bit can poke through...that's one of the reasons I bought it over other holsters because it didn't appear that they had this feature...and if I have a long bit holder in the end of the drill what am I going to do, cut a hole in the bottom of the other holsters? The little safety clip comes in handy and isn't in the way if you don't use it. I dropped my drill too many times and this holster will save me time and money and stress! I prefer this over a metal belt clip also. I also put my 16oz estwing hammer in it (without a drill in it) once and it works pretty well...the hammer doesn't swing around like it does on a hammer ring.

Other brands could really learn from CLC's impact/drill holster.I've tried so many other holsters and this one ended my search. It's by far the most functional system I've used.At first I didn't know what the velcro attached to the securing line was for. It's a simple and genius idea, in the event your tool should begin slipping out of the holster, the tool will pull up on the yellow line and stick to the velcro attached on the housing allowing it to be securely held, it also enables your tool from shifting and moving around during motion such as walking.The holster is being used with both my Milwaukee M12 Fuel impact driver as well as the drill. The elastic bands are extremely tight and hold any size drill bit in spades. I have to adjust to this holster as with other products I've used never held any drill/impact attachments properly, philips, shanks, bits were always falling out so I'm constantly looking down to my side to see if that's the case with this one, I'm happy to report that they hardly even move at all.Best part of this holster is the way the belt loop is positioned. Attached to the belt, the drill sits properly at 90 degrees and does not move forward and backwards as you walk, it just sits firmly straight up against your hip with almost no play.I'm having trouble finding anything wrong with the design of this holster, everything about it is superb. I don't see how something of this quality is offered at the price listed.

It is a very good product, it been a two years since I bought it, and it keeps good condition

I have a Ryobi drill and it fits fine. My only issue is the lack of security of any bits I might want to store on the holster. Most of the "slots" have no bottom and don't really hold bits tightly. I've had them fall off a couple of times, so I stopped using this feature. This was one of the reasons I bought this particular holster. If I were to buy a second holster, I think I would get something that had a top flap that would velcro over the bits to hold them more securely.

No decepsiona la marca se siente de calidad, trae vatios compartimientos de bits y puedes colgar 2 pinzas muy recomendada.

A good tool holster...

Gute robuste Tasche für den Hobbyheimwerker

Well made, seems like it will last for years.More importantly fits my makita drill perfectly.Glad I bought this, other holsters seem to be a little smaller judging by reviews.

Buen material y muy practico