Colour Name:Rainbow | Size Name:2.85mm - 1 KG EasyPrint PLA is our latest PLA and is made from 100% virgin PLA pellets. EasyPrint PLA feels a bit softer to the touch than regular PLA, it´s also more pliable which makes it perfect for all printers including printers with a Bowden set up. Due to the very low shrinkage EasyPrint PLA is very easy to use in all FDM/FFF printers. The chances of warping are very small with EasyPrint PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better. Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 185° – 220° EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned. Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool. EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.
M**W
It does print but avoid! Expensive for what it is
Just a quick background we print about 20kg of parts every month so we go through a lot of material so we aren't just a person who prints a few small things. On to the review: I used to use them a lot but then they got expensive and the filament quality wasn't great. So in short nothing has changed, it does print but I have to clean my nozzle out more often, and it says its black but its more of a dark gray and that's not exaggerating(second time complaining about colour, last time it was nearly transparent). I only got it because I was in a pinch and needed material. SO lesson learned not getting them again. (picture on the left is prima while the right is basicfil/ice filament)
B**O
Transitions could be quicker
Prints just fine but I wish the transitions were a bit quicker, and the colours more vibrant. They are quite "pastel" for allegedly "neon" colours.
J**M
Very poor quality at any temperature
Do not buy this filament, tried at various temperatures and gave very inconsistent results at all of them.
P**E
Transition to far apart
I've had some lifting/warping with this filament possibly not the fault and filamentAlso each section of colour is too long, I had printed 5 models before one colour started to transition to the next
Trustpilot
2 months ago
1 month ago
