Engine Rebuild Kit - Fits Honda CT90 Trail 90-1966-1979 - Gasket Set + Oil Seals

I purchased this gsk seal set for a 1970 CT90. The gaskets and seals were fine except the exhaust pipe copper gasket is too large for a CT90 and there is no Hi-Low range gasket in the set to do a complete rebuild. So I question why this is stated to be a set for the CT90.

Oil pump cover gasket is wrong for late ‘67 and on. Also, why not include sub-trans gaskets when the majority of years have the sub-trans? Only ‘66 to early ‘67 don’t have it. Doesn’t make sense. On a positive note, quality seems good for the price.

I should have listened to the other 2 star review on this page, I'm facing the same issue. I am going to have to purchase a new gasket set that works for my 1968 CT90.I purchased this for the exhaust gasket and the left crankcase cover gasket. This did not fit either of those. The copper exhaust gasket was 1/4" too large in diameter and will not fit in the gasket opening of the cylinder head. The crankcase cover gasket is missing an integral portion toward the back of the engine case. It now has a significant oil leak because this is missing. There should be a triangle shape in the bottom right hand side of the gasket.The description is unclear: "Does not contain the gasket for the dual range transmission, it only has the gasket for the single range transmission." I understood this to mean that it did not include the smaller gasket that goes on the top cover for the dual range transmission. What I believe the description means is that it also does not have the correct left crankcase gasket either. If that's the case, I believe all 1967-1980(s) have the dual range transmission, so the kit must only be for 1966-1967.5 CT90s, not 1967-1979 CT90s.Otherwise, the gaskets seem to be of good quality. Just not the right gaskets for any CT90 with the dual range transmission (which is most).

It's all there, high quality

Good kit but missing the sub transmission cover gasket which is now noted on listing. Also missing the left crankcase cover gasket. One in kit does not go far enough back to catch the drain hole from dual range gears back to engine so it will immediately start leaking oil once running. Also missing is the gasket that goes on top of the oil pump below the small cover plate held on by 4 screws. Other kits such as Vesrah and Athena have it. The exhaust gasket will not fit in the hole so had to gut out a little material from gasket so it would fit in recess of head. Seller just makes excuses saying buyer should look closely at listing also saying listing doesn't say it is a "complete" gasket set making no claims it is. Strange. Actually a nice gasket set with seals except for the previously above mentioned. Ebay seller I bought 2 kits from credited me back $10 so I could go buy missing oil pump gaskets then wanted the pictures so they could modify their next gasket kit to reflect a more complete kit having the oil pump gasket, proper fitting exhaust pipe seal, and left crankcase gasket that has the dual range cast into it. That's the kind of attitude and customer service that is nice to see.

This gasket kit did not have the left hand crankcase cover gasket. my question is are all kits from this company the sameor was mine just a one time mistake?

There is a few missing o rings and the transmission hi/ low cover gasket was NOT included. Very irritated and had to by another kit