Pin Vise Hand Drill Bits(20PCS), Micro Mini Twist Drill Bits Set with Precision Hand Pin Vise Rotary Tools for Wood, Jewelry, Plastic etc (0.6-3.0mm)

This little tool is perfect for resin work. The bits bite in without issue, there's little to no resistance when turning it, and the jaws hold the bits perfectly.My work is ten times more efficient now thanks to this.

Item is perfect for Warhammer. Wasn't sure which one to buy because of the reviews but this one held up to the mark. Grips the bits tightly, I don't know where they get the bits from but I needed little to no pressure to drill out some plastic on Warhammer models. I can't attest to sturdiness yet, but I would take note that it's a tool for fine detail work.

I bought this drill with some trepidation, after ruining several pearls with my Dremel due to the drill bit slipping and veering off to scratch the surface. I'm so glad I did! Bits are super sharp and bite into surface immediately, preventing any slippage, and I like that I can start slow to create the pilot hole and then drill away without the worry.As for reviews that complain that it's off center, please take extra care to fasten your drill bit perfectly in the center between the fastening pads - it's easy to grab it off center because the bits are extremely thin. Just pay attention to that first step, and you won't have any problems.

I haven't used all the bits yet (and probably won't), but so far it's pretty much perfect for what I need, which is repairing and modifying action figures. The bits will easily go through toy-grade plastic, and can even grind away metal screws if you have a stripped screw to remove and a bit of patience. The holes it drills are nice and clean. (If you're drilling into a smooth surface, try scratching/chiseling a little dent into the surface to keep the drill steady when you start a new hole.) Attaching or removing a bit is very easy, and they stay attached well. It's comfortable to handle. It does not feel flimsy or cheaply built (though I will update if anything breaks or fails). My only problem is a lack of a dedicated storage/carrying case; some of the included bits are TINY and easy to lose if you're not careful. Get a little case or something to store them in.Overall, I would definitely recommend this.

This pin vise is all metal. The handle being aluminum and the jaws, of course, steel. Works well with the jaws closing evenly down to nothing. This thing will hold a straight pin. Jaws lock up and drills will not turn in chuck. Only had it a week or so but have used it quite a few times.I did have a very small problem at first. Just a couple of bits missing. I informed the seller and they sent a new on out immediately. I got the thing in a day or two. Customer service is excellent. I can't think of anything else they could have done to make things right. If I need something they sell in the future I will definitely order from them.

Anyone that saw my review of Army Painter’s version knows I expect simple things out of a pin driver.1. Does it open and close correctly.2. Does it hold thin and thick bits.3. Does it prevent slippage4. Is it reasonably pricedThis is the one to get. While it is about a half inch shorter than most hobby versions, I will say the construction and smoothness in which it opens and closes makes up for it. It holds every bit I tried, and hasn’t had an issue. It’s very sturdy as well.I highly recommend it, but will only give it 4 stars due to its size.The picture shows it next to the garbage Army Painter one for reference.Rating: 4 Big Nuts out of 5 🔩🔩🔩🔩

Got this pin vise in and it's not bad for the price. It's a little small, like it's meant for a child's hand small, but it does its job well! Other than my index finger being longer than the pin vise itself, I have no complaints. The quality seems very good, and I'm sure I won't need to replace it for a while. The bits went through my project clean with no snags or issues. All around, a great pin vise.

Speedy delivery; smaller than anticipated; BUT it worked great on the repair project I ordered it to fix. I love it! Do wish it had a better means to store it as the tiniest of the 20 bits is really very thin and about 1” long. Found I could safely store it all in an empty Rx bottle and put ten of the tiniest bits in a scrap of bridal tulle by weaving them in and out 2x and rolled excess tulle up around them to protect them from damage and it sores quite well in my small tool box. I am very pleased. Great product for the price. And saved me $100 because I didn’t have to buy a replacement for my damaged item. I see many uses for it in the future.

easy to use

Ideal pour de menu travaux

Llegó rápido y en buen estado todas las piezas

1mm以上を持ってなかったので買いました。レビューがほとんど海外なのでちょっと不安でしたが☆の評価が高かったのと値段の安さで買いました。問題なく使ってます。ただ１㎜以下には握りが太いので今まで持ってた細身のピンバイスで使ってます。ドリルケースがついてないのが残念。ついていたら後☆半分は評価が高かったかも。

レジンアクセサリー作成に使用。他のものを使ったことがないので何とも言えないですが、力を入れて回すとキコキコちょっと耳障りなおとがしますが、自分の使い方が悪いのだと思います。家にあった電気ドリルの先端がホームセンターで購入できたので、今はそちらを使用しています。2、3ミリのレジン作品に穴を開けるのも、少量ならハンドドリルで十分ですが、数が増えると結構大変な上に時間もかかるので。