SunWave RV Awning Fabric Replacement | Premium Vinyl Canopy | Awning Replacement (16', Burgundy Fade)

Got this to replace an older deteriorating vinyl pull-out awning. Getting the old one out was harder than getting the new one in. You really do want some silicon spray for the track, and need to read up on how to install this in the bar (dealing with the springs, etc). But the videos on their site and on youtube are pretty good.You WILL need to have a friend or two help out at least on pulling the cord on the trailer run, but the rest is doable alone if need be. All in all took about 2 hours for me to install, with friends helping about 30 minutes of that time.The quality of the awning is really better than I expected. It's quite thick, multi-layer, and I had no worries about ripping it during install or usage. It was stronger than the one I was replacing by far. It does have a slight odor at first, and needs some time to stretch and air out when you first put it in. (So if you're doing this on a weekend, do it Friday, not Sunday.)

Seemed a little thinner than old one, probably because it's new. Instructions were unclear how the cord was inserted, but I was able to figure it out. I would recommend this awning, however you will need several people to help.

My 14yo grandson and I installed this in 2 hours to include removing the old one. looks great... Highly recommend this product...

Looks great and easy to install

The awning seams to be of good quality and was fairly easy to install!

Used it for my slide toppers and was a great addition from the old ones were in the history book. They helped immensely keeping the sun off the slides and helping the AC not work so hard.Recommended

We had this installed by a pro and it seem to go on very easy. Looks like a good quality. This is our second purchase.

I bought this because I really wanted to replace my old RV awning. Mine was in pretty terrible condition and I'm not sure why I didn't replace it sooner. The shop I went to made it like it was going to be crazy expensive to do, so I figured I'd try to do it on my own. All things considered - it's a pretty good price for the awning. They do include a instructions sheet which does help out, but I'd recommend looking up a few Youtube videos to get the idea of what you'll be doing in general. I'd also say it's a 3 person job for sure. And like other reviews, WD-40 in the channel that the awning slides in will help a ton. And a ton of patience, we spent a good chunk of the day setting this up and hit a few setback along the way (mostly due to how dirty the channel was in my instance). Once done, it looks great. ItSide note: I will mention that Amazon suggests the replacement pullstrap and the fabric installation tool to go along with it. In my instance these both came in the box I got from Sunwave. Not sure if it was just me but you may not need these recommendations. But the extra fabric installation tool would come in handy for sure.