Shower Wheels Shower Door Roller Shower Pulley 23 mm Shower Enclosure Runners Shower Rollers Shower Door Runners Type A 8pcs

Very very pleased with these wheels, fitted and running on my sliding shower door in about 35 minutes. See below for how I did it.Anyway, they fitted perfect and as they have stainless steel bearings they should not seize up like one of the old ones did. We always clean our unit after use but if you at least try to clean the track and rollers every now and again and lubricate with silicone oil you should have no worries in time to come.Prior to delivery I had removed the door close door but not fully, just push down on the chrome assembly from the outside both at once and when then move down push the door a little inwards away from you as you should be outside the door. You should now have access to clean and lubricate your rollers, and refit so when you get your new wheels the old ones should come off with ease, that's why mine swapped over easy.To remove the door from the frame, just lift as it is just hooked on the track by the two top runners. To fefit the door hang the top runners on the track and as the bottom of the door goes towards the bottom, just push down on the runners and then you can clip them back under the lower track guide.Hope this helps. BE CARFULL AND TAKE YOUR TIME THE DOORS CAN BE HEVY, Get another person to help lifting the door if needed.IF YOUR ROLLERS ARE SO BAD THEY ARE DROPPING TO BITS, then just buy new complete rollers. Be sure to measure your wheel's and see the size is the same.RegardsAnthony.Btw I did not get them for free or money off....I'm just like you wanting an honest user review. Good in it :-)

Does the job

Saved a fortune compared to buying manufacturers replacement parts for a little effort.

Arrived in good time looks good quality. Not fitted yet.

Excellent and prompt reply from their excellent staff

Just waht I was looking for. Door works like new agin. Thanks

Perfect fit for my Mira shower cubicle.

excellent product