Size:6.9ft (210cm) length The low loss transmission line can be used in almost any application where handling characteristics, improved shield and low loss is required. This pigtail alleviates much of the strain, and remains flexible. A United States defense standard is used to help achieve standardization objectives by the U.S. Department of Defense. Our Cables meets applicable Department of Defense requirements for Government use. RF Pigtail 3D-FB Cable SMA Male to UHF SO-239 Female Copper Coaxial Antenna Connector 6.9ft / 82.5'' / 210cm allows base and any mobile antennas to connect to handheld antenna jack. PRODUCT FEATURES: - Product name : RF Coaxial 3D-FB Pigtail Cable SMA Male to UHF SO-239 Female Antenna Copper Connector 6.9ft (82.5'' / 210cm); - Connectors : SMA Male to UHF SO-239 Female; - Cable length: 6.9 feet / 82.5 inches / 210cm; - Cable type : 3D-FB coaxial copper low-loss; - Impedance : 50 Ω; - Operating temperature : -40°С ~ +85°С. PACKAGE INCLUDES: RF Copper Low Loss Pigtail 3D-FB Cable SMA Male to UHF SO-239 Female Coaxial Antenna Connector 6.9 feet (82.5'' / 210cm)
A**M
Core is solid, not stranded/flexible
Yes, you can bend it, so technically it's "flexible" but I can tell the core is not stranded like LMR-240 Ultraflex or RG58A/U so I would not recommend this for mobile use or for anything that's going to be moving around a lot.I am using it in a static position in my car on an HT and I use a hand mic so the radio itself doesn't move, so it's not like I'm manhandling the cable all the time, but the radio is going to be in and out of the car a lot, so the cable is going to be handled more than it would if it was a true permanent install.I would have preferred this to be more supple and flexible, and honestly at some point I will probably replace it for something that will withstand flex, but it does seem to be well made and is providing good TX/RX on my DMR HT connected to a mag mount.
D**.
Name brand quality cable at a decent price
The quality of the cable is what you would expect from LMR brand cable. The connectors are attached very well. They have a boot that extends from the connector. Not sure what the material is but it is pretty thick. I like the cable. It is longer than what I needed. There were other sellers that had shorter cables. I didn't buy from them because coax is very important. They made no mention of what type or brand of coax was used. I don't buy cheap quality coax. The coax is pretty flexible and has a good bend radius. I will definitely keep this seller in mind the next time I need some pigtails.
J**S
Good Quality Cable , Great Construction, Great Coax, WORKS GREAT !!!!
All around its a great product !!! Good solid construction concerning end connectors, nicely done !! I can see and feel quality construction !! I bought this to hook up antenna from my selector switch to my SDR pro 2 receiver/computer system and it works GREAT !! LMR coax is a great product type. My larger 1 KW systems I use LMR 400 to the antenna's LMR 200 is great for the small systems and receiver only systems, its flexible and compliant enough for IN THE SHACK USE !! I plan on ORDERING MORE in about 1 month from this company. John Bellas KC2UVN
J**H
Great Cable, Price a little high
Honestly it's a bit pricey for what it is. That said, it seems to be very well constructed. I use it to connect my SDR dongle to the amateur radio antenna I have on my roof, and it works perfectly. You have to be a little gentle with these cables if you are not familiar with this line.They are a little stiff because of the shielding and the way the manufacture them for the low loss that they are famous for. This shouldn't be a problem for most people. Just don't expect to use it in a place where you will have tight bends. I mean, you can bend it tight, but you are going to damage the part you're paying the higher price for that keeps the signal loss so low.
D**D
Perfect for connecting a miniVNA to your antenna coax for analysis!
I really like these pigtails because it lets me connect my coax from my antenna to my VNA which is SMA with a rugged and long flexible cable. I haven't noticed any issues with any of the cables i bought and i've left a few of them outside during a southern weather event with no ill effects.i've never transmitted through one of these, so i can't speak to that, but for receiving and analysis they're top notch!
Z**0
Great cable!
I use this cable in the car to connect my HT to the mounted antenna. It allows me to hide the HT between the seats in the center console without disconnecting the cable. I simply close the cable in the console door. This cable is lightweight and great! I did have an issue where the first cable sent was the shorter variant in a bag labeled the longer variant, but the seller resolved that issue.
U**E
Works great for RTL-SDR to existing antenna
Bought this to connect my RTL-SDR to my existing coax connected to my 2 meter 1/4 wave ground plane antenna. Works great! Nice fittings on both ends and good signal. Allowed me to pick up air-band on my RTL-SDR for the first time after adjusting the RF-gain. Fun stuff. Would buy again.
K**J
Very Well Built
Low loss coax, quality connectors, and good construction. Using it to connect my dual band mag-mount to my RTL-SDR. The heat-shrink over the connector sleeve/coax is a nice touch. I will definitely buy future jumpers from this seller.
D**S
The build
The feel of the cable is sturdy. I've only had it for a few weeks. If it can last with the abuse I put my cables. I'll be a happy camper. It's actually looking better than the ones I bought through our local radio store
A**R
This product met my needs.
Awesome product..Well made. Used on portable scanner .
M**R
De lire les commentaires des personnes qui ont acheté le produit pour savoir leur évaluation
Pour pouvoir utiliser un radio portatif mais le connecteur SMA ne fonctionne pas car il ne fait pas contact avec l'appareil
D**.
Useful product
Works well. Connected my handheld to external antenna.
A**R
Qualite
Bonne qualite et de bonne longeur conecteur solide transport rapide
Trustpilot
1 week ago
5 days ago