RIOTORO CR1088 Prism Mini Tower RGB Lighting Window ATX Case - Black

This case is one of the best cases I found for a small form factor using an standard ATX MoBo. Kudos to Riotoro because there aren't many full sized MoBo cases at this size.Pros:-Awesome size-RGB is definitely a neat addition-Clean and professional look-Included magnetic dust filters-The USB ports in the front are USB 3.0 (THANK YOU!)Cons:-Front facing is a very cheap plastic-RGB lighting on the front facing is poorly glued into the light housing-If you want fans on the bottom of the case, you will have to drill through the magnetic air filter or just take it off. It would be nice if there pre-drilled holes in the magnetic strip-The plastic window is very easy to scratch, which would be more acceptable if the case was at a lower price pointNeutral:-Flipped motherboard design (I'm not the biggest fan, but it doesn't look bad at all, especially if you don't have lettering on the side of your graphics card)-Could have more options for wiring through the bottom and more clearance under the MoBo (another 1/4" clearance would be perfect because standard 120mm fans are hard to put in unless you put them in before the MoBo), however the cable management isn't hard-Would be nice to place the RGB/USB interface in a different space on the inside of the case because a 240mm radiator cannot fit on the inside as intended, HOWEVER, you can still fit one in (ex. H110i pro)

I used this to build a system for my daughter, who wanted to keep her PC to her left on the shelf under her corner desk. It was easy to put together and the cabling hides quite nicely without doing any fancy wire-loom stuff. However, I did want to add color changing front fans and they could not be used with the case's built-in controller due to its proprietary nature, and compatible Riotoro fans don't seem to be available. I opted to use a pair of fans that came with their own controller, meaning more wiring, but it all came out nice in the end.

The media could not be loaded.  I never thought I would do an LED heavy build, it's never interested me before. When I went to build a new gaming PC this summer I found it hard NOT to buy memory and key components that lacked lights. When it came time to pick the case I was limited by my desk's left-side shelf for the case. That meant the CR1088 quickly became the top choice with it's the flipped-ATX and right-side window. The stocky frame isn't too tall and the big window shows off all my components. I'm very careful when handling the window, as I'm sure if i weren't it may scratch.

I love this case I can now travel with my atx pc. I dont like how you have to turn the motherboard upside down it looks strange. You will need to buy better fans and coolers or your components will run too hot and get damaged. Get noctua fans or a good liquid cooler this thing runs crazy hot.

Absolutely love the RGB function of the tower itself along with the clear side which allows clear view of the RGB on the graphics card and ram. The case seems small in size but my ATX mobo fit very well. I had no problems with building my system and would recommend this case not only for the RGB function but the size and quality as well.

Great case, good price point and easy to build in. I love the design of this case it has great bones to build in.

Smaller then my micro atx/itx dark flash case and better quality!!!!!

Great case, clear airflows, easily wired. It’s a bit wider, but shorter, but plenty of room.

Not a bad case...nice size..can fit a full-size ATX board inside it. Price could have been better and a few cons..window is plastic on one size.. I can understand the way it's designed to fit a tall cooler. The only other moan a touch i suppose..on the side where the cables are. As the case is designed with 2 compartments motherboard side and psu side and cables. It has a led connection but even if you connected a strip you would lose most of it as there no hole to place it on the other side near connection but much further on in the case. If your looking for a small case for a Full size ATX board this may be the one for you.

Was very surprised to find internal RGB hub doesn't seem compatible with the recommended RIOTORO Cross-X Lightning RGB Fan Kit. So for the time being have these two products working independently. The documentation provided and further information available on their website doesn't seem to match. Getting a response via their website has taken over a month despite a 'one-working day' quotation. Has put me off buying additional products from this manufacturer.

It's a very good case for the price! Don't think you can find something smaller to fit proper full ATX board in. Build quality is great, easy to assemble and very nice looking RGB light, which you can extend with additional RGB strip to light the interior of the case. You can also control FAN RGB lights connecting them to the controller unit, so the light will be consistent across all the LED's you have. Really cool!

Love it. Small and compact and does the job.

Nice compact case for full-size ATX motherboards. CPU fan height and GPU Width is something you need to look into to make sure you can get the side panel on