Alla Lighting TS-CR H13 9008 LED Headlights Bulbs, 6000K Xenon White, Xtreme Super Bright 10000lms 600% Brighter Dual High Beam and Low Beam Headlamps.

Im just going to dive into the issues and fixes.1. You LEDs need to be vertical when installed. If they are horizontal or diagonal they will cascade your beam into oncoming traffic and you will be flashed. The instructions do mention the correct position but their fix is not as easy as they say. They say to unscrew the collar and turn it to another hole. the only other hole on the collar was directly across from the original, and will not change the orientation of the LEDs. You will have to drill your own hole. This was trial and error for my first collar but it looks to be 1/4" left of either hole. my left and yours might be different so if it doesn't work drill a hole a 1/4" on the other side of that hole. You will have to counter sink the screw head for the large collar to fit over the smaller collar.2. This one is not in their instructions: the headlight bulb has 4 LEDS, 2 on each side. you will see that the LEDs are staggered with 1 further in front then the other, that is the low beam. the 1 further back is the high beam. The high beam (the 1 closer to the base) needs to be on the bottom. If you have this on the top then when you put your high beams on it will actually be your low beams (see pic). I know this makes no sense but it is how they are angled. If you have these in the wrong position, then again, you will be flashed. I pissed off a lot of people one morning. The small collar has 2 tabs and the large collar (that the small collar goes into) has 4 openings. Just remove the small collar and do a 180 turn and put the tabs in those openings.Once you have done this (it's a pain) these light will work great. I just hope they last a long time. I'm only 2 weeks in from using them. If they sizzle out i will update.

Easy instal and no error codes! Nice and bright

Bright and easy to install love them!

I replaced the old halogens in my 2011 Mustang GT with these bulbs. Before, I could barely see at night, but these light up the road well. Make sure you aim them correctly, which was easy to do on my car. I didn't have anyone bright light me at all.

They're bright, but they won't last. Same story with a majority of these kind of lights on Amazon.The instructions are a joke. Daytime running lights won't work with these bulbs (they flicker when ignition turns on then go off). The passenger side bulb randomly shuts off or goes extremely dim for a period of time, then starts working normally. Random led chips will turn off and on sometimes during night drives and will catch your attention. The fans have a pretty loud humming sound when they're on (heard inside and outside). It's a pain in the neck to have to keep taking them out to check so I'll just chuck these and spend the money at Autozone for a more dependable set.Cannot recommend.

I bought these for my 2011 Jeep Wranglerand har no idea these lights had fans on them and they flicker constantly. I'll probably ride with them for awhile till I find something else. They are bright though!

I bought these for my new F250. They are nice and bright but do not direct light appropriately, as there are shadows and bright spots in the field of view. I tried to adjust the lamps by spinning them around, but there is no way to adjust them like others. Will be going to something else. Too bad, as the F250 is a pain to replace three lights.

Definitely worth it easy to install literally in minutes. As always make sure your cars battery is not old and worn our as it may not give off enough current to power the bulbs and also make sure you don't touch the leds!

Easy to install, decent light for the price

Huge improvement over the factory lights. Very easy installation. Would highly recommend.

I’ve bought 4 sets of these headlights, For all my fleet vehicles!Fantastic!

Very bright

Excellent!