ANEX Ultra Low Profile Offset Screwdriver Set 3 Piece, 90 Degree Straight Slim Plate For Tight Area, Made in Japan, Black

I recently had a small home repair project under the sink fixing a water leak at the drainpipe for my garbage disposal. Of course, the pipe retaining screw was positioned directly under the 90 degree elbow and required an off-set Phillips screwdriver. I actually had an off-set screwdriver in my toolbox, I don't think it had ever been used. Well guess what? It still hasn't been used because it was too long to fit in the space I had to work with. I was able to do a temporary fix with some JB Weld epoxy and went on an Amazon search for some low profile screwdrivers. I ordered these and they arrived the same day as my JB Weld patch job failed.This off-set screwdriver set saved the day. These have to be the shortest low profile off-set screwdrivers ever made!!The quality is very good and the Phillips head bit fit very securely in the screw head.I know these will last a lifetime because I'll probably never use them again!!

Needed to attach wire to a window switch and other screw drivers could not fit at all. This worked perfectly and fit in very tight position.

This is a great tool, and a must have in my opinion for those hard to reach screws. Keep in mind many of the competitors that are not made in the Japan like these are, miss a crucial point. These are completely straight, there is no angle to the "handle" portion. Which means these can fit in spots others can't. Also the retention of the bit with a clip ring seems to be a more durable design than the press fit of the knock-off versions.

These are some of my favorite tools. It is rare that I need them (maybe once a month) in my line of work but when I need them, they truly are life savers. I've had these over a year and they have saved me dozens of hours of my time. This is one of those things that when you need them, nothing else is an option. They have saved me from taking entire pieces of equipment apart just to make a simple adjustment. I really cant describe how much headache these have spared me from.One thing I did is replace the key ring with a small bright carabiner. This is just an easier way to clip them somewhere in my pouch or bag to keep them from getting lost. There small all black size can lead to them getting lost in your tool bag. Another helpful tip is to use the hole in the handle of the one your using with a lanyard. I have needed this on a lift 30 feet in the air and they can get pretty easy to drop because 9 times out of 10 if you have to use these it will be in an awkward position. Even if you are just on a ladder or on the ground I find using these with a lanyard to be a bit easier due to the awkward position your hand usually finds itself in.I wish they made these in different fastener sizes. Anex if your reading full torx, and full metric and standard hex, and precision sizes would be a godsend.

These little guys are a bit pricey, but definitely qualify as a niche tool that you probably wont find yourself needing very often. I've got a custom watercooled desktop and had to replace the front three fans without wanting to drain/disconnect the loop (so, remove them while leaving the radiator in place). Problem is, I only had a narrow gap between the screw heads in the front of the fans and the glass shield on my case. Luckily, the ANEX Low Profile Screwdriver Set, with enough patience, was able to remove and replace the screws given the tight quarters I was dealing with. I'll probably never use them again, but they held up to that job and for that they were worth it. Quality seems sufficient for occasional use over a few years though, if I were to guess.

They seem to be very well made, and are very low profile. They were a good value also.

The screwdriver was perfect for the tight, vertical spot that I needed them for! I had to return a different pair from another company that had a slight angle and got these ones with no ankle. They’re exactly what I needed to get the job done!

It isn’t very often that you need an ultra low clearance screwdriver but when you need one it can possibly prevent you from having to further disassemble whatever it is that you’re working on. These work really well and are made robustly enough to actually put in a good day’s work. They were delivered as advertised and on time. I would recommend.

This is the same low profile screwdriver that snap on sells on their website! It comes from Anex! Excellent quality for the price! Helps me remove a leading edge flap fairing on 737s! Aircraft mechanics take note! No more shaving bits!

Cumplen su función, perfectos para alcanzar lugares pequeños aunque un poco complicado el agarre, me parece que las puntas se barrieron un poco con la fuerza pero aun funcionan bien

Utili, comode e resistenti. Utilizzate per un lavoro speciale, queste chiavi ultra piatte sono consigliate; attrezzo professionale.

So after receiving somebody else's item the company were very quick to amend and send out and also no received very quickly the item required. It's Spot On and very good quality. They also did an origami bird which was a nice little touch. appreciative that this Japanese company is a good one. With no hassles.

Artikel genau beschrieben, zügiger Versand