SuperATV Polaris Replacement Wheel Bearing - Replaces OEM 3585502/3514635

Half the price of OEM and just as good.

I bought this bearing after buying yet another bearing that was a little more expensive but which also came apart when assembling the hub onto the ATV (Sportsman 570). This bearing actually appeared to be a little higher quality, because the clearances felt tighter, but this one actually came apart far more easily. I had already installed an OEM bearing in the other side, but since no more were available locally (and I could get it faster), I decided to take a chance on this one. Like most people don't have a hydraulic press, so I have to tap the bearing back into the carrier. Unlike the other two bearings (OEM and previously-returned bearing), while tapping this one in, the inboard inner race, the spring, the seal, and the inboard ball set fell out. The spring actually fell out before the seal, which I couldn't really understand. This led to these components getting a little dirt on them where they fell. Since I didn't want to turn this into a huge project, I cleaned them off where I saw they'd picked something up, put new grease on, but of course, when I put it back together (still partially installed in the carrier), I could feel a piece of grit upon rotating the bearing. Since I have another OEM bearing on the way, I'm just going to use this one until it prematurely fails and call it even rather than wasting time taking it out without using it, or wasting mineral spirits and a lot of time cleaning it up. However, I would never buy this one again. There is no reason that normal installation should cause the bearing to come apart, and this doesn't seem to happen with the OEM bearings.It fit, and it showed up early, so I gave it two stars instead of one.

Works great make sure you grease

I like they fit like stock and there less price. had them in 6 months about 10 rides no issue's, also I just trail ride

Be sure to fill them full of grease before you ride. They have little to no grease in them. Mine took about 25 to 30 pumps of grease to fill them. Other than that they are a good bearing. Buy the correct grease tool and grease before you install them

Good replacement bearing. Slight play but not much more than OEM. Holding up well in my Sportsman 500.

Perfect fit 2016 rang 900xp crew

Perfect fit for my 2014 Polaris Ranger 570.