KP KOOL PRODUCTS Universal Gas Can Spout Replacement, Gas Can Nozzle with Gasket, Stopper, Collar Caps (Black and Yellow) & gas can vent caps, Pack of 3

I initially gave this product 3-stars because the caps provided only fit ONE of my several plastic gas cans, from numerous manufacturers. The replacement caps -- of either thread type -- leaked around the threads of my gas cans from various manufacturers, save one exception.The spouts and seals did fit, and the small spout-caps for the spouts were excellent, so I was able to use them with the cans' original can caps (sans the original spout) but replacing the old, messed-up spoutsI chose not to use the provided plastic vents for the gas cans, preferring to use metal versions readily available on Amazon and elsewhere online.>> I once had a plastic vent of that type (but from a different manufacturer) that went bad on me, leaked fumes, and it caused the gas to degrade long before its time. Not to mention being mildly dangerous due to the fumes collecting in the vicinity.>> So, I've got an emotional distrust and mental block about using the plastic vents...over time, they may lose a good seal. I far prefer and trust the metal vents I bought.For clarity: All the parts were of very good quality, the two types of replacement gas can caps provided just didn't fit most of my cans.I would recommend buyers test all parts with water BEFORE you put in any gasoline. (Obviously, you'd completely dry the water from the cans before putting in the gasoline...but you knew that, right?)UPDATE A FEW DAYS LATER:I've now changed my rating on this product to FIVE Stars. Why the change?The seller contacted me after my review appear on Amazon -- they wanted to make things right for me. They were kind enough to offer me a 100% refund.This pretty much changes the whole review. THIS COMPANY STANDS BEHIND ITS PRODUCT, and goes out of its way to keep them happy.Thus, I believe everyone can now order with confidence...because if the parts kit doesn't work with your equipment, you can obtain a partial or full refund fairly easily.Just contact the company through Amazon, explain your problems and ask if they can help?So, by all means ORDER WITH CONFIDENCE. Not sure they'll fit your gas cans? Well, the honest truth is that they won't fit some cans -- but as many other reviews attest, they do fit one heck of a lot of cans!! If you've got some older cans and some oddball, limited run cans that you bought for cheap...you won't know until you have the kit in hand and can test the part on your particular cans.But, the Customer Service standing behind the kit is OUTSTANDING, and will make things right for you.What do you have to lose? Give the parts kit a try, see if it solves your problems.

Because of some of the reviews and knowing that sizing of thread and opening could be issues, I was a little apprehensive about ordering online. Product works as advertised. As a matter of fact, it works great (like it is supposed to). I have a five (5) gallon, red Blitz gas container. It had a spout that was designed by a bunch of idiot engineers (I assumed more than one engineer because it was made for a person with three (3) or more arms) from an inferior school (or maybe no school at all). In partial fairness to the engineers, they were also probably trying to satisfy some useless government regulation. In any case, this product is simple, appears to be durable, and does not waste a drop of precious gasoline, when I transfer the fuel to either my mower or my emergency generator.

I have bought a couple other brands before this and I think these ones are the best out of the three for several reasons:1) Gaskets are nice and thick and do not leak.2) Threads fit perfectly on all my Midwest brand jugs (have not tried other brands).3) The spout caps slide on making for the best pour (some brands are threaded on the end, reducing the inside diameter and making a slower flow)4) The vents fit nice but not too tight unlike some others. I still chose not to use the vents that came with this since I already had some MagicFour vents laying around, which are metal and thread on and off, but If I didn't have those I wouldn't hesitate to use these ones.The only reason I gave it 4 stars instead of 5 is because the spout caps were too tight and I almost couldn't get them to go on, but hopefully after they've been on for a bit this problem will resolve itself.

This spout is a great replacement spout for Rubbermaid\Gott Gas Containers. I was a bit worried if the spout would fit properly as I purchased a spout for another Rubbermaid gas container a year or so ago and the cap on the spout had "ears" on it so the cap would not fit with container closed and the spout placed in the container (i.e. for travel or storage). So, I was bit skeptical. My skepticism was not needed with this replacement spout. The threads are "course" so it fits the Rubbermaid\Gott containers perfectly. It does not leak. My gas container was completely full and did not leak when I held it upside down in the closed position. Next, I took the spout out and placed it in the ready to pour position and placed the cap on top of the spout. It did not leak not leak either when turned my container upside down with the spout out but with cap on the end of the spout.Fitting properly and not leaking were my two biggest concerns. I would definitely buy this product again if I need anymore new spouts for my old rubber\gas containers.

Great price! Fits perfectly on my gaz cans!

Spout seemed to work on my older Wedco cans but the newer can I had with the ratcheting spout lock does not work at all, the cap physically does not screw down all the way. This new spout is a little smaller in diameter than the original Wedco one so have to use the supplied Yellow (Coarse Thread) cap in order for it to tighten and seal properly. The vent cap is not compatible either but I didn't really need those parts... so for the most part, I managed to breathe new life into 2/3 of my old cans.New spout seems to be made from a durable hard plastic so suspect it won't hold up in cold (Canadian eh) weather so be careful not to crack it! Hope this helps.

Je suis tres satisfait de ce kit, j'ai plusieur bidon 20L WEDCO 2009 et un 10L WEDCO 1973 !! Et tout fonctionne tres bien.

They look good but the spouts are not flexible at all

Seems to replace Scepter nozzles ok...very small leak when pouring from Wedco...flex nozzles a little stiff in -25°C