RoyaloHi Lift Jack Mount kit Hood/Door Hinge Bracket for 2007-2019 Jeep JK Only

I purchased this for my next off-road excursion as I am tired of it flopping around in the back of the Jeep.Pros:- Reasonably priced- Components see sturdyCons:- No instructions- Torque screws are not OEM Head SizeI am a fairly handy guy and I was able to get this installed without instructions. However, it would be nice to have that included just so that I could ensure I am installing the item correctly. Couple of things to start, you will find that the hood bolts that replace the hood torques are not the same size as the OEM torque bolts. The OEM bolts require a T45 Torque bit to remove. The bolt that replaces it requires a T30 Torque bit to install. They are in my opinion inferior bolts to the larger head and size of the T45 OEM part. The T30 bolts are just slightly longer than the OEM bolts. Also, in my opinion, the manufacturer should have nylon or rubber washers included in the kit. As it did not, I ended up having to go to Lowes and picking up rubber washers to complete this installation.Secondly, this jack kit always for mounting on the hood or side of the Jeep. However, the caveat for the side mount is that you have to have your doors on. So that you can use the door hinge as the mount points. I initially wanted a side mount but I ride with my doors off whenever possible. So I retrospect I would have rather purchased a different mount. Of course, that could have been something that instructions or general information in the ad might have cleared up.It is relatively an easy install and took less than 5 minutes once you determine the layout and how to install.After installation, I tightened down the Hi-Jack and it seems quite secure. You can see the very rudimentary layout in one of the product pics for the item on Amazon. I will update this later if this item fails for any reason. Or stands the test of a few off-road trips. All in all, I am happy with the purchase even though I had to go with the hood mount as opposed to the side mount.

No está mal. es resistente.

My old ones blocked the washer spray but these are perfect. The spray goes just under the jack

Easy to install and works well.

All good .. thank you

Install is a snap, seams to be pretty sturdy. You’ll have to snug up any loose bolts after driving a a bit but that’s to be expected.

Don't believe the product photos. Shown on a JL but front doors will not open when installed. Would work on the back door, but would look goofy I think, IF I could install which I can't because the Torx bolt on the rear door stripped out and I had to drill it to remove it... slightly too large bit and the "nut" inside the door stripped so I need to tap it for a larger bolt because I've not been able to find the part number anywhere for this weird double nut that is used for both of the hinge Torx bolts. What a pain.