BushwackerOE Style Factory Front & Rear Fender Flares | 4-Piece Set, Black, Smooth Finish | 21917-02 | Fits 2009-2014 Ford F-150 (Excludes Raptor)

I was looking for something that would protect the paint around the wheel wells on my new truck. The tires that come on the new Fords are terrible at throwing rocks on gravel roads, and salt and sand on black top roads. The extend-a-fenders do exactly what I wanted them to do, which is stop rocks from flying up at the side of my truck. They also obviously protect the 3/4" of steel wheel well that is nicely painted right above the tire. They look really good with all the other black that is on my truck. I also wanted to put mud flaps on, and was able to do so without drilling any new holes in steel (had to drill one hole in plastic for front flare.Read below) . I installed both the flares and mud flaps without drilling steel. The mud flaps are a really heavy universal rubber flap that I got at our local parts store. Together with the flares they look great and protect my truck. You may want to allow a little extra time to what it says for installing the Extend-A-Fenders, as it did not take the 1.5 hours they talked about. It was more like 3 to 4 hours. The hardest part is getting the rubber trim edge on straight and neat. On my 2010 it did ask to drill one 1/4" hole in the "bumper cover." This is simply some red plastic (on my red truck) that is right behind the bumper for the front flare. No big deal. Over all I am very pleased. Nice product. They are on secure and tight.

I bought these to protect a new truck from light brush, WalMart parkers and give a custom look at lower than OEM expense. At 1/4 of that cost, I thought of painting them, but didn't and the matte black has looked good. One has taken some light scratch/scuff from a highway barrel (plastic), that careened off the front bumper. They fit perfectly before and after that incident, though I probably need a new clip on on the one that took the hit. There is a wild hog problem on my place out of state and they can be hunted either with a 25-06, AR-15, or F-150, and these covers hang on well there. The body shop buddy that put them on had a guy do it easily for $80, and they are tight and fit well with some overhang at the stock chrome bumper, since I run a standard wheel and tire package, with no Raptor fascia. If you are putting on a larger set of off road tires, these would look great also. I have brushed against Ranch gates and with careful maneuver gotten off with only a scuff. These use your light OEM/stock hardware to stay on, so don't expect to hit a tree with them at any speed, but they will protect your finish if you take care. I am very pleased and have the only truck in town so configured. They look stylish and custom. No mods were necessary and the shop said they could not see where road gravel could get inside the these covers. They have done a pretty good job as mud flaps to keep dirt off most of the finish except from splashes and on the lowest body areas. It's a truck!I'm happy with the product. I would usually reserve 5 stars for their condition when I trade it in 6 years or so. Recommended.

Purchased a different brand from another company Directions was not readable they ran a copy off on photo copier that was so dark i had problems trying to install them so pissed took them to a local customs shop then they said they are having problems installing them, missing parts directions to dark went to pick truck up the guy had them installed said it looks like crap its missing parts gaps and so on and said he isn't happy with the look of these, he did not charge me to install or take them off cool deal ty Davenport Customs in Durham Nc. He recommended bushwacker so i sent the off brand back to amazon and purchased them on here When they arrived i opened them 100% to me better Quality glossy with a textured finish i am not going to paint them looked at the directions i installed them within 2 1/2 hrs myself great job Bushwaker

I am not so sure how much I like the looks of these, however my wife does so guess I am keeping them.My son and I installed these in a bit more than 2 hours, no huge issues and only minimal swearing required.I do want to comment on the value, I realize that much of the expense in making these is the engineering needed, and they do fit fairly well, however I still believe that a four hundred bill is a bit much for these, they are not as robust as I was hoping them to be, however I have not compared them with cheaper versions.All in all I would say that I am happy with them.

Installed on 2010 Ford F-150 XLT. Was a little harder to install the rears than I expected but got them done. These are a great fit and look great. I bought these bc I had rust starting over the back wheel well due to rock chips. I got the rust removed, treated the area with rust conversion and then sealed it up with primer then, because I don’t have super bondo and paint skills, I covered the area with the fender. After installing them and knowing that no metal gets screwed or scratched in the process and seeing how good they look, I would install these on a new truck just to protect the areas they cover.

what started as a little rust was not repaired well at body shop and repair fell off in car wash a year later. new body shop recommended these versus buying a new box for the truck. i called bushwacker and confirmed that parties sell their product at lower price than bushwacker does. these parties buy in bulk and remarket online. had installed by auto body shop. they said it was a pain.

I love these Bushwacker Fender Flares. They are very well made; look awesome, and they hug the body of my truck perfectly even without the rubber inserts which I left off. I had them painted the Ford Pale Adobe color and also added a two-tone paint job to my pick-up. Now my XLT looks like the two-tone Lariat package but better because my bumpers are still chrome. The painted bumpers on any Pick-up look goofy in my opinion.

The directions were not very good. My truck us 2013 F150 .Also you will need to take off Factory mud flaps abd and either modify to reinstall or leave off. The clips that come with to hold are not useful . I ended up using a couple holes that did line up with a bolt and then put self tappers in rest if way. Felt more secure doing that. If you are a little mechanical they do fit and can be attached and look pretty good.

j ai acheter ce produit parce que l intérieur des ailes de mon camion des éclats de peintures tombait a cause des petites roches que les pneux projetait, avec les contours d ailes c est maintenant réglé

Excellent product had them painted and they were great

Vendor delivered quickly and within time promised.That being said for the money (3x more than similar generic products) these flares should fit PERFECTLY.Even though I followed the instructions to the letter there is a small gap between the front end fascia and the leading edge of one of the front flares (see photo).

Perfect.

Shipping was very fast. The holes did not line up perfectly but with persistence I managed to get them installed. They look fantastic on my 2010 F-150 XLT so it was worth the trouble.