BDK Saddle Blanket Seat Covers for Cars Full Set - Multi-Color Baja Striped Woven Mexican with Matching Headrest Covers for Truck Auto Van SUV

Wasn't stated as fitting a 2013 Toyota corolla, but it does, with the except of the covers being a smaller than I'd like for the front head rests (see photos). But its close enough. Everything else is perfect! The seat covers are lined with a thin foam, which seems work perfectly for preventing slipping and bunching of the seat covers. But because of that, its hard to slide them over the seats. Plan to spend a few hrs on this project, on a nice day and take your time getting everything pulled on and straight. I got everything just so, and it looks great! I'm a 4' 11" female (possibly an advantage for this project?) And did it all myself. I was able to get the bucket seat straps under the seat cushions vs pulling them around the outside, over the plastic, so it looks nicer. There's no pocket on the back of either of the front seat covers. The black, stretchy part of the rear backrest cover goes on the top. You need to cut holes in the backseat cover to allow for seat belts and headrests- cut small holes and no one will see the cuts. I was worried about the seat fabric stretching when people sit, and causing the holes I cut to expand. So before I put the bench seat back in, I cut the holes and used a lighter to singe and melt the edges shut...it did work, and it did not light the whole thing on fire lol not overly flammable material. I think the material will hold up well. It looks nice and feels like good quality fabric. I dont expect it to rip.

I have a 2016 Honda HRV. It only took about 10-15 minutes to install the front covers. However, it took at least an hour and a half for the back. I may or may not have been forcibly pinned between the seat part and the back part at one point. Momentarily. I wasn't able to use all of the straps, and the whole thing would have gone much smoother if I'd had a helper. The front seats and headrests were almost a perfect fit. The back seat was a little long, but tuckable. The back seat headrests were a little too short, but it's not very noticeable. We'll see how well it stays in place - I don't have many back seat passengers. It's a little misleading because the video for the product gives instructions for how to install in a car with a 60/40 split back seat, but the back seat cover doesn't allow for that. Fortunately I don't use that feature very often, but if you did I think it would be really annoying. It looks and feels great, though! I've always wanted these and now that my car is 6 years old and almost paid for, the seats were looking a little gross. Overall happy so far. (It even matches the pillow covers I bought from Amazon, lol.)

Put in my 2022 Silverado work truck. Mainly was looking for something to keep my seats clean but came across this and happy I ordered. Head rest is just a tad small but it almost seems to have stretched to fit after a couple weeks. This isn't the highest quality seat cover out there but for 20 some dollars it is a pretty good value. Got it matched up with a Hooey steering wheel cover. Install went pretty easy. Slip loop over and then slip on headrest. Lower strap clips together.

I ordered these, made sure to put in the year make and model of my car to make sure they would fit, which it said it would. Got them, the front seat covers fit fine, the back bench seat cover did not. Was obviously not universal for my car. Came with 3 rear headrest covers, but then the seat cover itself did not have a slot or holes for you to slide the headrest through. Also, the back seat cover did not fit properly At all, was no way for me to actually attach it. I love the design, and they are very well made, but they definitely aren’t universal and they shouldn’t confirm that it will fit your vehicle if indeed it is not made to fit your vehicle. Really would have loved for these to have worked correctly in my vehicle.

Just a head's up to my fellow JT owners - these are retro cool but will not fit your vehicle correctly. I had to stretch a headrest cover so much that it warped - there is no elastic or straps - so it looked sloppy and just hung. The driver's side seat is too bulky - not enough stretch in the cover/elastic. It looks too sloppy and the pattern is crooked when stretched - it also covers up one of the seat adjusters and does not fully cover the rear of the seat (it is just too small). If you have a Rubi - the seat cover will not allow you to use the back of your seat mesh. If your lifted, the seat cover will immediately move too much/bubble up as soon as you hop in/out just once. Too bad - would have looked cool. :(

I've had the most difficult time finding seat covers for my car, which is a Smart Fortwo. The seats have the seat belt compartment thing attached to them which makes it difficult to find anything good. Amazon claimed these would fit my car and they did!Since the back has straps it went on super easily and removes easily too. They look fantastic and are comfortable, I was worried they'd move around the more times you sit on the seat but they stay perfectly still. The quality for the price is great too. Would definitely recommend! :)

Okay, for the price these are exceptional. The fabric is very thick & durable, similar to a woven blanket. The front seat covers were easy to put on, but the backseat bench cover is a bit of a project. Took me about 30-45 mins. But so worth it!! IMPORTANT NOTES since a lot of people in the reviews complain about no seatbelt holes, they clearly did not read the instructions because you need to cut the holes yourself, as well as the head rests! I also had to cut holes for the adjustable arm rests in my car. So if you’re willing to put in a bit of work, I would absolutely get these

I love how these look in my car, and even with the need to cut holes myself for the seat belts and head rests on my back seat, the extra effort is so worth it! I love them

The seat cover didn't work well for my 2022 Honda CRV because the elastic can't go under the seat. But the customer service team responded quickly and the overall experience was good. Thanks!

I am SO disappointed..spent ages researching seat covers for my new car (picked it up yesterday) & made sure I entered the car model & year...front seats fit ok, except while looking at a YouTube video on seat cover installation (different brand) apparently the driver's & passenger's seat are different. The fit is actually a little off, so now I'm going to have to take them off & do it all over again. Btw, there's no customer support from the manufacturer - no 1-800 # or website, seems like the company had changed hands several times. The rear headrests are ATTACHED...so the backrest portion doesn't fit & to cut holes big enough would end up looking terrible, plus not sure I have the ability to do it properly & neatly. The seat portion is equally difficult - instructions suggest taking the bench out - I couldn't possibly manage that. The interior of the car is black & dark grey & I wanted to brighten it up with some cute seat covers. The pattern is lovely, & there was no strong smell to them. I feel pretty defeated right now, I may try to get some advice & help from a friend - that would be a plus in more ways than one because it seems like you need 3 or 4 hands for all the pushing, pulling & tugging required.

They fit the front seats well enough, but the back seat covers don’t have any holes or openings to allow for seatbelts so they’re not useable. Kind of a disappointment to only be able to use half of the product

Fairly easy to install, look really good. I'd question the durability long term tho. My only issue is there wasn't seat belt buckle holes, had to make my own. ( for the rear bench seat )

yhe rear seat couvers are loose