Color:Black Application Instruction 1.Choose your desired design , you must flip your design before cutting2.Reverse the pattern and cut it onto the vinyl sheet with a craft cutter. Craft Cutter Setting: -Cricut: Blade: Standard; Setting: Iron-On-Silhouette Cameo: Blade: 3; Speed: 8;Force: 4 ;Passes: 2; Material: Smooth-Brother: Blade: 1; Cut Speed: 1;Cut Pressure: 1*Settings may vary based on blade condition and age of machine. 3. Weed out the excess 4. Heat and Transfer Place the sheet with your design on to your shirt and place the teflon sheet on the top of your design. Home Iron: -Please Heat the iron on medium setting (302°F– 320°F); -Press each section of the design with medium/firm pressure for 10-15 seconds; Heat Press：-Preheat garment for 2-3 seconds; -Apply design at 305℉; -Use medium pressure for 10-15 seconds; 5.Cool Peel Peeling the clear pet film after the vinyl turns cold, just in 15-30 seconds later for the vinyl to cool down.*If any part of the iron on vinyl lifts off, repeat the steps above until you can peel off the clear backing without lifting up the vinyl. Warm Tips1.Make sure there are no wrinkles on the material. 2.If you are having trouble, try turning the shirt 90 degrees and pressing again, this should eliminate problems from cold spots. 3.If you've already ruined one shirt, keep using it to experiment. Cut small pieces of heat transfer and try raising or lowering your temperature, or pressing longer or for less time. 4. Please wait for at least 24 hours to wash your design.
S**D
Thick vinyl
This vinyl is for my business for shirt. The pros: thick vinyl seems to be good quality. Not a high gloss which is what I wanted. The value was really good for the cost. Cons: the setting for vinyl for my machine didn't work. They gave setting to put into my Silhouette but the force and blade depth needed to be increased by 1. Weeding is much harder since this vinyl has a rubbery texture so make sure to pay attention to the finer cuts and letters that they don't pull off with the rest of it. All in all I will buy again. The black is what I was referring to above. The white vinyl I will not buy again. It wouldn't cut no matter what setting i used. It seemed to be thicker in some areas because the weeding would not allow the pieces to come out cleanly.
J**O
It's very easy to use
I'm not using vinyl all at once, I'm using CANMEO, it's very easy to use, it feels good, I like it.
H**R
It does not weed at all.
I have my cutter on the highest pressure and it will not cut this stuff properly. Do not buy. It is a very thick material.
J**N
Don’t waste your money
This vinyl is HORRIBLE. I tried to cut it severalTimes on different settings and it wouldn’t work. Worst vinyl I’ve ever worked with, currently on the way to the store to buy more. Looking for wma way to return this hot mess.
A**L
super thick
product is easy to weed but it is super thick. It got the job done but i would like something a with a little more movement
Y**O
This stuff is amazing ! ! !
This stuff is amazing ! ! ! Great vinyl , Easy to cut and apply.
E**H
Great product!
Easy to use and looks great!
M**E
I had no issues weeding.
Not really sure what all the issues were about with others having a hard time weeding this. I had no problem. Nor did I have any issues getting it to stick to fabric when pressing. The hardest thing I had was figuring out which side went on my mat to put into my cricut. I was even able to weed this with my fingernail. Seller may want to add some info to customers letting them know what side goes down. We will see how it holds up wash wise next. When the time comes.
Trustpilot
3 days ago
2 weeks ago
