GORILLAAutomotive 63631 Standard Mag Gorilla Guard Locks (12mm x 1.50 Thread Size) - Pack of 4

Put on my 2019 Toyota Camry.Does not fit correctly on a lot Toyota's with only the single provided washers, the shank is too long. You can torque them down and the washer will not be contacting the wheel. You need two washers or one really thick one. If you are replacing mag seat lug nuts, just pry off the washer from the lug nuts you took off. They're just held in place with notches, work from side to side with a screwdriver and they will come off. Now just use two washers per lock and the shank length matches the OEM lug nut. Definitely recommend removing them before bringing it to a shop, guaranteed at least one washer will go missing.FYI, an 12 point 16mm socket can still be hammered into the lock, although it would be much more difficult than most locks since it has a wall around it.

Fits for my FJ spare tire. It’s too bad they don’t sell a 5 pack

Was looking for a little protection on my BBS rims. Of course no lock is full-proof, I'm merely banking on the assumption that if you can make it difficult for the would-be thief, then they'll either pass it by or take so long in trying to brake them off that it increases the likelihood someone sees them and they get scared off before they're through. I love the design of these because you cant as simply hammer a special socket on the outside of it to get them off - because the outside wall spins freely of the inner "key socket" part, which is too odd of shaped and thin to hammer a socket in their easily. I definitely recommend these if wheel security is your concern. Another thing to note is you can contact Gorilla and get them to send you matched sets of these lug nuts - that way you can replace every lug nut on every wheel. This again increases the time it takes to get off the wheel and ultimately your chances of keeping the rim!As the other reviewer mentioned, the pictures do match the actual product. I got the Gorilla 63631 standard mag model, as the description stated. Please check out their website first and make sure its the type of lug nut you need.

The outside does not spin as stated so I think someone could vice grip and turn it would be a pain but could be done now if they did spin would be harder to penetrate.

1995 Tacoma 1st gen, It does need a second washer so that is does not bottom out. The outer piece spins free so you can't just throw some vice grips on there to take off the lug. Good design.

This are perfect fit for my 2013 Highlander. Just got a new set of tires and needed to secure my investment.They look very durable and very secure. I feel much better now .

Don't loose the key because most mechanics have never seen this type of lock and the spinning ring makes it a heck of a lot harder to remove. Using the technique of smashing a star point socket on the outside of the lock won't work on these unlike other wheel locks.

Gorilla Automotive 63631 Standard Mag Gorilla Guard Locks (12mm x 1.50 Thread Size) - Pack of 4These don't fit a 2007 RAV4 with OEM mag wheels. With the washers on and torqued correctly they bottom out on the rotors. The stock lug nuts are about 1/8" shorter.These are listed on Amazon as fitting 2007 Toyota RAV4 as well as on Gorilla's website fitment chart.I was told and shown by tire store and it past the return date.