Ultra Bright Lightz 1100 4-Switch Backlit Controller Box | Emergency Vehicle Strobe Warning Lights | Siren | Speaker

This switch box is very good quality. Aluminum construction. The switches have a positive “click” and don’t have a mushy feel like other boxes I’ve owned. The box has a smaller form factor, so if space is a priority this would be a good choice. Includes tags to label your amendments, wire harness, mounting bracket and instructions.Measurements (without bracket):4 1/4” Wide3 3/4” Deep2 1/4" TallI’ll be using this switch on my side by side to operate some roof mounted bar lights, and air horn and a siren. Overall, robust build quality and includes everything you need for an easy install. Highly recommended.

I use this switch box to control extra lights on my truck and other accessories. I used this switch box because it is smaller than other 4 gang automotive switch boxes and allows me to nestle it into a small cutout on my dashboard. Space is quite tight so I went with this one due to its convenient size.I was very happy to see an included wiring harness. Other switch boxes I have used did not come with a wiring harness. This is very useful if you ever need to replace the switch box or relocate it because it can easily be unplugged from your vehicle and removed without cutting any wires.The mounting bracket that comes with this work very well if you intend to position it on the top or bottom of the switch box. I realized that it cannot be used to fasten on the rear of the box which could limit your mounting options if your desired mounting point is the back of the box. Just something to keep in mind.Also included with this switch box is a sticker sheet to label your switches. There is quite a wide variety of stickers, some of which are quite funny. I decided not to put any on yet because I may change some of the switch positions.The plug for the wiring harness feels quite sturdy and even has gold plated connectors which I did not expect from this product. The harness wires are quite long as to reach up underneath the dash board but not long enough to travel all the way to the engine area. If you need to run wires to the engine, roof, or back seats, you will need some extra lengths of wires but those may come with the other device you are installing.Overall I would recommend this switch box. It is very small for the number of switches. It also very discrete compared to some of the other flashy switch boxes out there. I like the low profile red switches. The wiring harness is super nice and is one of the best features to this switch box. I highly recommend if you need a switch box that fits in tight spaces.

The switch box physical construction is quite solid. Although the listing indicates the case is powder coated aluminum, it seemed much heavier than it should be and is magnetic - formed steel case.Electrically, the device is somewhat less robust. As the photo shows, the switches are rated at 20A, but the wiring is not. A photo shows the wiring configuration - a single fused positive line, a single ground for the switch illumination, and a switched line for each of the circuits. The lines are attached to a standard automotive box connector. A matching connector with 6' wires is also provided, meaning the wiring and the switchbox are easily installed separately then connected. Although not specifically marked as such, the wiring measures at 16 AWG stranded. The harness is 6' long. This wiring is rated for 10A at that length, not 15A as shown in the listing. It is delivered with a 10A fuse installed which is the correct rating. I have one light bar that is also rated at 10A, others with different ratings. Connecting all the desired units may well require limiting how many are turned on at one time unless the wiring is upgraded. It would have been preferable to fuse each circuit and increase the wire size on the supply.The unit includes quite a selection of switch labels. It should be noted that, although the switches are illuminated, the labels are not. Be certain to install the box in a location with sufficient illimination to read the labels.This switch unit will be more than suitable for most LED lighting configurations. Keep the total load under 120 watts.

I Like the size of this switch box, When installing extra lights or anything else it is great to have an switch box ready to go!

Well built, and functions perfectly.

This has been the perfect set of switches for my to use for caution lights on my truck. I was trying to plug everything into lighter outlets to run caution lights when I am towing large trailers and now I can just push a switch to turn them on. They are backlit so they can be seen at night and come with plenty of wire that can be easily tucked away out of sight. The mounting bracket also makes it easy to put it in the spot that is the best for your needs. Very satisfied with the look and operation of this product.