Konstsmide 7561-000 Trento Post Outdoor Light/ 1 x 11 W E27 Max Wall Lamp/ Frosted-Opal Lens/ Stainless Steel/ IP44/ Outside Light Stainless Steel silver

My review is more of a question to the seller. These fittings are for outdoor use although rated at only IP44.Outdoor lights require to be IP65 rated to be fully waterproof!These lights are very nice looking indeed but even though they have a rubber seal, condensation stillbuilds up inside the fitting then drops down on to the E27 metal threads causing them to rust. I used LED flame lamps with these lights and the water has caused one to blow! At a cost of £7 a lamp they’re not cheap to replace either.All 5 of my fittings are the same and after every rainfall I have to unscrew the heads, pour out the water and dry of the lamps and connections.Not good at all for outdoor use!I don’t know what the answer is to preventing the condensation so if the seller can perhaps give me an answer that would be appreciated!

Purchased these lights to replace existing on top of a pair of garden balustrade pillars. The lights work well and give more than enough light. However On the same order were two E27 11W bulbs as stated, only to find you can only use stick bulbs with this light, so beware when ordering bulbs. I found the fixings to be adequate but two of the supplied stainless steel screws supplied had faulty heads so had to use non stainless as I had already started the install. Overall am very pleased with the look and performance of the lights. But for the couple of niggles I would give 5 stars as the lights do as expected.

Wasn’t quite what we thought so returned it

Very happy with these outside lights.

Really great lamp which looks great in the garden

I bought this to match existing bollards on my new house. The fitting is fairly flimsy but does everything it should and looks well.I was replacing existing, which had been damaged by lawnmower or vehicles. It requires two screws into a base (eg concrete found or slab), which are inserted throught the bottom cover ring, which is a thin moulding and can distort if post is impacted. I would recommend packing the bottom ring with mortar or timber, and ensuring it is carefully sited to protect it from impact.

ok

This replaced taller bollard lights.Nice and bright with no glare.Easy fitting.I did slieve the fixing screws so as not to distort the base.Philips/posidrive screws not too robust for driving in at an angle.Would still recommend this product, really nice effect. 👌