Metra 956549 99-3527 Pontiac Grand Prix 04-Up Dash Kit,Black

Overall great. Perfect fit. Does not include clips to attach bottom of dash. Had to take clips off of old dash to use to clip it in place.

This worked good for installing a double DIN stereo in my 2000 Wrangker TJ. Not nearly as good quality as the OEM but gets the job done.

Went in my 01 Jeep tj perfect

Looks good, but the fit is horrible. It is loose and the lack of all the factory clip locations doesn't help it.

Quality is ok. The original panel is secured with three screws and two clips but this panel was designed with one less screw (the lower one). The instructions on cutting the dash is lacking one key point, cutting the right side of the dash as instructed and illustrated would cut off one securing point for the radio. One more thing, you cannot use the ashtray anymore with this panel and this panel comes with two inserts. One is a blank off plate and the other is a useless tray. They should have either adapted it to use the ashtray or just left it blank. I gave this three stars because even with these issues, it was still worth it and functional.

I installed this in my 2000 Jeep Sahara with a Pioneer AVH-1400NEX radio. No trimming of the opening was needed and it looks just like the stock bezel. Had to play with the radio sides to get the height and depth correct for the opening but it worked nicely. The only issue I have is that the A/C vents don't fit perfectly. In the stock bezel, the round things that the vent clips two are two different sizes. On one side of each vent, the round thing is a little larger than the other. This is probably to make sure it's in the correct position. On this bezel, they're both the smaller size, so the vent is a little loose on one side. Not a huge deal but it's worth mentioning.

Kit works and looks amazing! Take your time cutting out the dash, use the radio that you will be putting in to measure the area to cut. The radio will set a little off due to the dash itself but some washers and it will be flush and straight. Oh and when you transfer the spring clips off of the old panel to the new one glue them on or they will come off if you remove the panel in the future.

While overall it did its job, I did hav a couple issues. First, the brackets to attach the radio had to be modified slightly to get the mount screws aligned properly. Second, the opening the ash tray belongs in is missing a molded part to put the t back. Now, after being installed for a few months, the plastic on top is starting to warp, causing miss alignment with anointing panels.

Overall very happy very good brand. Only complaint is the right hand pocket doesn’t stay snapped in. Manufacturer should have provisioned a screw to hold it in place like the top compartment.