Nooelec NESDR Mini USB RTL-SDR & ADS-B Receiver Set, RTL2832U & R820T Tuner, MCX Input. Low-Cost Software Defined Radio Compatible with Many SDR Software Packages. R820T Tuner & ESD-Safe Antenna Input

I've never been all that interested in radio, or spending any money on it, but when I saw a video describing these $20 RealTek chipset based dongles and how they could be used for SDR and radio spectrograph type applications, I was like "For $20? Count me in!"Like most people I'm using SDR# and not any of the vendor's drivers. The thing that took me a little while to figure out was that the USB drivers for this thing have to be installed manually. (There's absolutely no "plug and play" support for this thing at all, because the driver used by SDR# is a very generic low-level USB driver that is only designed to allow applications to essentially talk directly to just about any USB device supporting some serial protocol.)The easiest way to get this working is to download sdr-install.zip from the SDR# web site, extract it, and run the install script that will download everything you need including zadig (the generic USB driver installer), the RTL chipset plugin for SDR#, and SDR# itself.Before running SDR# you need to run zadig.exe and use it to install the driver. This requires that you select "show all devices" from the Options menu, select your RTL dongle from the pop-up menu, and tell it to install/reinstall the WinUSB driver for that device. Be careful to select your RTL dongle before hitting install or you may accidentally install this over your mouse driver or some other device. (Like I say, this is a generic driver that installs a really basic software interface for any USB device that supports certain attributes, so there's nothing to stop you from overwriting one of the other drivers on your system if you select the wrong device.)Once the WinUSB driver is installed you can just run SDR#, select the RTL device as the input, and hit play.Tip: I'd recommend turning on the auto gain check box for the tuner ("Tuner AGC") in the configuration panel though, unless you want to mess with the manual RF Gain control. (I was able to do pretty well just using the auto gain, but before I enabled the auto gain every signal I was getting was very weak. So you really need some sort of gain adjustment be it manual or auto.)Without much effort and using only the little included antenna I was able to pick up NOAA weather radio (narrowband FM), a number of commercial FM radio stations (wideband FM), the wideband FM transmission from a Sennheiser RS110 926MHz analog wireless headphone transmitter, and see a bunch of other signals on the spectrograph that I didn't recognize.I was also able to pick up 2 or 3 ADS-B transmissions from commercial airplanes, even though I was sitting in my basement and using only the included antenna, though all of these airplanes were within the line of sight angle provided by the window in the room I was in. So this tuner seems to be good for ADS-B, but obviously you're going to need an unobstructed outdoor antenna of some sort to receive signals from all directions.The remote control that comes with the dongle seems to be totally useless since it appears to be an IR device and I don't see how a computer can even receive a signal from it without a separate IR receiver device. (The NooElec dongle doesn't appear to have an IR receiver on it, but I could be wrong.) In any case it would require either the vendor's DTV software or some other software to make any use of it, and I don't know of anyone who's written anything useful that it can be used with.At some point I'll probably buy a MCX to some sort of coax adapter and wire up a proper antenna for it outside, but for now I'm just messing with the cheapo little included antenna. It seems to work better than I expected.Anyway, this is the most interesting $20 gadget that I've bought in a long time. I suspect that one day it will come in handy for helping to locate and rectify sources of radio interference.

Bought this thing for home assistant to read gas meter broadcast. In metro atlanta area, the freq is 915MHz. I use the rtl_433 addon and autodiscovery. But the device class was not set which I had to manually set to "gas" on the autodiscovery topic. Then I added a few utility meter entities to track day/week/month uses. Works like a charm!It is very sensitive to the location of the antenna. The antenna is a bit weak, I need to adjusted it a few times in different locations to get the max SNR number for my meter. It can receive the signals from multiple meters around the neighborhood, normally you can identify yours by the number printed on top of your meter.

I bought this little guy thinking that it would be a neat way to check out some parts of the local RF scene without investing a lot of money. It is that and more.First, a couple of nits: the software that you can get for these is not exactly intuitive. I had some minor trouble getting SDR Sharp up and running with this device. The antenna connector is miniscule; I'm thinking this unit would be helped a great deal with a better antenna than the stock unit, but it's going to take some searching to find an adapter to convert the antenna port on the unit to a more common size like BNC or SO-239. Neither one of these issues is a show stopper, and if you get into this with the idea that it is for experimentation, then you'll be satisfied with what you get.One disappointment: if you are interested in eavesdropping on your local emergency services with Unitrunker and they are using the newer trunked multiplexing 800MHz systems, one of these units is not enough. You will need two: one to monitor the control channel, one to monitor the individual trunked frequencies. I didn't realize this when I made the purchase, and I'm waiting for the right opportunity to buy my second one so I can pick back up where I left off with that idea. With two of these units and Unitrunker software, you'll have a police/fire scanner on the cheap.But other than those things, this is a great little receiver. I was able to spy on the ADS-B aircraft location reports, tune local radio stations, listen in to a few Ham radio transmissions (quality was not so good on those, I'm thinking it's the antenna) and more with just the included antenna and some freeware I downloaded off the web. (SDR Sharp, Cubic SDR, HDSDR, etc.) Let me be clear: the included antenna is seriously cheesy, and it's a very poor substitute for a more substantial, and possibly homemade unit. But it's good enough to pull in strong signals to prove the thing works.If you've done your homework, you will know that these units were originally designed to receive European digital television signals, and that they have been "hacked" via software to make them a more broad-spectrum receiver. (They are useless for U.S.-spec television, by the way.) As such, they include a credit-card sized remote control that you might as well just throw away when you get it; there's no use for it here. So this is not a simple, finished product that you just plug into your computer and use; you have to tinker with it to get the capability out of it. As I mentioned, I had some trouble with getting some of the freeware software to run on my Win10 laptop; the problems were driver issues that I managed to overcome with lots of help from my research assistant, Dr. Google. If you are a radio amateur with some experience, this will be a cool thing to play with. If you're more like me, a radio amateur n00b, you might have to futz around a bit. More's the fun!

Easy to set up and zero issues and still using this with one of my ham radio computers. Easy to setup and works right out of the package and gives you the world of shortwave listening, ham radio and local broadcast stations and just a piece of wire inside the house works just fine. Longer wire outside hanging from a tree will increase the distance and amount of stations you pickup to listen to. Zero issues!

I have two of these and they are working great. One is running on a Raspberry Pi Home Assistant monitoring some Acurite sensors on 433 MHz. The other is running on a PiAware flight tracker pulling in 1090 MHz. They were both plug and play with no issues. I did pull the wire out of one of the antennas and had to order a replacement. I'm not sure if it was faulty quality or if I snagged it on something.