Smart Light Switch,Compatible with Alexa and Google Home,1 Gang 1 Way WiFi Touch Switch,2 Way or Multi-Way Control by SmartLife APP,White Alexa Switch with LED Indicator Light-Neutral Wire Need

Couple of points :Firstly if you're not electrically skilled please seek advice before installing this.Secondly I see this time and time again - if you do not have a neutral wire terminated in your light switch this switch will not work !Thirdly the switch itself is fairly deep and you may need a spacer around the switch if you cannot replace the back box.I already had a Wifi dimmer light switch which works really well with Alexa and the Smart Life app. I hadnt tried this brand before and generally expectations of stuff like this is that they can be difficult to set up and instructions are poor - not so here all worked like a dream.Installed 2 switches in my Daughters redecorated room. First one was 1 gang 1 way replacement for a single way switch. Straight forward wire swap and connect to neutral. Powered up and switch worked ok with touch on and off. Then pressed and held for 3 secs and red light blinks, opened smart life app and connected to 2.4 Ghz WiFi network (doesn't work on 5 Ghz). Smart life app found the switch immediately and asked for my WiFi password. It was connected within less than a minute. I got a notification on my phone from the Alexa app saying a new device had been set up in Smart Life (nice !). I could work the device immediately from Alexa but I went in to change the name of the device.I set up the second device in the same way but this was slightly more complicated electrically because it was a 2 way switch. This is where novices should seek help (or watch you tube but I didnt say that !) I identified the live supply and the switched live to the light . I then discarded all the 2 way switching wires by coiling them up in the switch box. I then connected the neutral. With so much wiring the back of the box, depth was limited and I ordered a 10mm spacer to space the light switch off the wall. Set up was then as simple as for the previous unit.These switches operate 2 banks of down lighters in the same room. from 2 locations. Once set up in the app I was then able to group them into a room and gave the room a name (lets just say Fred). I could then say to Alexa turn Freds room lights on or off and it would operate both. I could also say turn on light one or turn on light two to switch the banks on individually. My daughter is very pleased with her new lights and bluetooth speakers in the ceiling which also connect to Alexa - all from Amazon :-)

Good product, looks good & works well

Ease of setup with app

Smart looking switch easily installed and easily connected to the Smart Life App. Both Google Home and Amazon'a Alexa picked up the switch via linking with Smart Life.The switch easily fitted into a 35mm back box. It needs both a live & neutral wire to power itself, as well as obviously the switched live going out to the lights. A lot of switches only have live & the switched-live and are lacking a neutral wire.My LED lights are fully dimmable and have worked fine with a manual dimmer for years, but this dimmer switch completely fails to dim the lights and the bulbs start to strobe/flash brightly rather than dim.Reading the reviews it appears that it works well for many, but quite a few report flashing lights. I'm unsure if the problem is faulty switch or some incompatibility with the dimmerable bulbs.

Item received was faulty, returned for a refund

Great quality and transaction from start to finish

Works perfectly and easy to connect to wifi

This was well put together and had a nice finish. It was difficult assembling the plate as the instructions weren't clear to me. However I got it in the end and fitted the switch nicely to the wall. The registration with smart life was simple too and I was enjoying the remote switching.However I had to return it as it wouldn't work with my bulbs. The dimmable range was not fluid and jumped a lot and unless on full power, the LEDs flickered badly.. enough to give a headache.I reached out to BSeed support on their web site but was told to speak with Amazon and I shouldn't contact them directly, so I had no choice but to return it.You may be lucky with your LED's but I since have learned there needs to be compatibility between the switch and LED bulbs. I believe there is no recognised standard. Some switch manufacturers indicate compatibility with specific bulb brands but I couldn't find BSeed providing that info. In the end I opted for a "trailing dimmable switch" from Varilight that has WiFi. It's supposed to be sophisticated enough to configure and remove these limitations. That worked perfectly. Still if you find bulbs that work and it works for you then it is a nicely made product.

Funciona muy bien, fácil de instalar y de configurar. Es muy práctico en habitaciones grandes donde sólo hay un interruptor, lo enciendes y apagas sin tener que levantarte, y para personas con movilidad reducida. Buen invento.

Ich baue die Schalterserie seit Jahren mit den Artikeln von BSEED aus und bin absolut zufrieden. Die Qualität ist top und auch nach Jahren sieht die Schalterserie aus wie neu. Ich hatte bisher noch keine defekte Steckdosen, Schalter usw. Allerdings sollte man Ahnung haben wenn man die Schalter mit WLAN Funktion verbaut, da diese auch einen Neutralleiter (N) benötigen. Oftmals liegen diese allerdings nicht in den Schalterunterputzdosen bereit und man muss diese von den Steckdosen "ziehen" Auch haben diese Schalter keine Klemmvorrichtung und müssen in die Unterputzdosen verschraubt werden.

Ich kann nur sagen: spitze!Qualität gut, Funktion hervorragend, Installation einfach, "outfit" sehr schön und stylisch, Achtung, macht süchtig!In der App "Smart Home" problemlos einfügbar, "Alexa" übernimmt automatisch die Funktionen des Gerätes.Die beigelegte Anleitung ist einfach, ausreichend für die erste Installation. Für Besonderheiten, wie z.B. Koppeln von Geräten (2-Wege-Funktion) kann man nachfragen, es gibt eine gute und sehr schnelle Antwort und Hilfestellung.Ganz kleiner Kritikpunkt: Zum Kabelanschluss sind Schraubklemmen verwendet, diese sind oftmals zu schwergängig und für flexible Leitungen (Litze) ungeeignet. "Up to date" sind Steckklemmen, in Europa bereits Standard. Man findet sie bei Schaltern und Steckdosen und Verteilern (z.B. "WAGO-Klemmen). Hier können problemlos auch flexible Leitungen verwendet werden.Wäre schön, wenn das mal geändert wird.Ich habe bereits das halbe haus ausgerüstet, u.a. auch Rolloschalter verbaut, alles funktioniert prima.

Toll und

Il est possible d'utiliser cet interrupteur pour contrôler des objets connectes (lampes, ventilateurs ou autres) COMPATIBLES TUYA, c'est important.Pour cela il faut faire ces quelques étapes, attention c'est des travaux électriques, ne le faite pas si vous ne ne maîtrisez pas électricité.Procédure pour remplacer un interrupteur simple1) Enlever l'interrupteur que vous voulez remplacer2) Relier la phase et le plus qui va a lampe avec un vago triple (pour avoir en permanence l'électricité à l'ampoule connectée) + sortir une phase de ce branchement Important, vous vous retrouvez avec une douille toujours alimentée, soyez prudent et marquez le dessus, ça vous évitera une mauvaise surprise.3) Brancher la phase nouvelle et le neutre sur l interrupteur (L ET N), L1, L2 et L3 ne seront pas branchées4) Monter l'interrupteur en suivant le mode d'emploi5) Installer l'interrupteur dans l'application Smart Life, à ce stade il ne contrôle rien, il clique quand vous l'utilisez mais c'est tout.6) Aller dans scène, cliquer sur le + en haut a droite puis sur "Lorsque le statut de l'appareil change", choisir l'interrupteur nouvellement installe, "interrupteur 1", "ON' puis cliquer sur le plus a droite de "Alors", puis "Exécuter le périphérique", choisir l'appareil à contrôler puis choisir l'action a effectuer lors de l'allumage de l'interrupteur7) Refaire pareil pour le "OFF" de l'interrupteur