Legrand Wiremold CMK50 Cordmate II 10 Foot 12 Piece Cord Cover Kit, Organizer for Wall, Holds Up to 3 Cords or Cables, White (1 Pack)

Excellent will fit any 16 gages wire ( speakers )no problem

These were bought to hide my surround sound speaker wires across the living room. I purchased one kit before measuring the length in which I needed so of course I ended up being short. This Kit Includes: 4 - 30" CordMate II Cord Channels, 3 - C59 Couplings, 2 - C56 Flat Elbows, 1 - C57 Inside Elbow, 1 - C58 Outside Elbow, 1- C51 T-Fitting. This means you have 120" of cord cover. I used a saw to cut these to certain lengths and the plastic held up very well. It didn't split, break, bust or fray the ends to make it look unprofessional. With the addition to the couplings, elbows and fittings you can run these very professional looking with no cords poking or hanging out making your living room or other place areas of the house you have cords look like crap. This is a very nice alternative to tacks or coax cable clamps you nail to the wall. It's a more expensive alternative but the look you get with these really pays off because it reduces clutter.There seems to be plenty of room inside the cord channels and I was able to place two separate 18 gauge speaker wire into this without any issues. What many other comments fail to mention is the fact that these can be unsnapped from the side to allow you to add or remove cords more easily without having to run them from end to end. This was a nice bonus as I had already run the cords and had them hooked up prior to receiving these.They came white but are easily paintable to match any room / color you have and makes this is a nice addition to have with these. I will note that prior to applying the sticky side to the wall I use alcohol to wipe down the entire area I would be placing these to clear up any dirt or debris. This tends to be an issue when sticking anything to the wall and you should follow this step to ensure that it lasts for awhile. These can be used not only for speaker wire but ethernet cable, HDMI cable, coax cable, power cables and anything else you can slide into this. I would like to add that these do have limited space inside so you may not want to use these for every cord behind your TV / TV stand or computer desk. Once you do decide a place to use this and stick to a surface it adhesives very quickly and you only have a few seconds to decide if that's where you'd like it or not. I'd go ahead of time and make specific spots you want to place these to avoid any crooked placings.All in all a very nice product and so far so good!

Was missing a coupleStraight connect but that was okay I had some small clamps that work perfect were I ran them up the wall in concession trailer even with the peel and stick i don't have to weary about it coming fown

Purchase Date: 19DEC15Purchase Price: $13.54Update: 02OCT16 and 23JAN18While remodeling our bedroom we thought we could mount a TV with stand on a certain wall and hide all the wires with no issues. But...then of course many different issues arose and running the wires in that wall would cost way too much to professionally do and to do it myself well was not worth all the work and headaches. The last alternative was to use Wiremold CMK50 for a neat look. Item is very well packaged and internal dimensions of the Wiremold are 7/8" x 3/8" which can accommodate a good amount of wires. 120 inches = 10 feet total. After reading the reviews and watching YouTube I was hooked.Make sure to wipe down your wall prior to installation. The adhesive on the Wiremold itself is very strong and once it is set it is not easy to remove.Measure everything twice and cut once as they say! Have a level tool handy so that you install them straight (having a second person to help is great). After your measurements you can use a hand hacksaw and use a little bit of sand paper if you want to clean the edges after cutting. I purchased a flat plug extension cord for a more sleek and clean look (see pictures). I also switched the wall outlet (180 degrees) so that it would face the correct way for easy connection. Beware: Please shut off homes electrical panel breaker for that room prior to doing this - for safe measure test the outlet after shutting off the breaker with a outlet tester to make sure there is no power running to it. You will be surprised sometimes at how you will shut off the breaker for a certain room but there might be a outlet or two that are still running power because its connected to the room on the opposite side. Taking your time makes the installation a snap.Already purchased a second order for a couple of other things around the house. (PICTURES ATTACHED)UPDATE: 02OCT16 No problems with the product or its quality.UPDATE: 23JAN18 I accidentally hit it with my laundry basket and (sad face) let me tell you...the sticky backing took a chunk out of the paint. Approximately 4" by 4" round. I had to repair my wall, sand, paint, and re-install. Use caution this glue stuff is tough.Please Note: I did NOT receive any type of incentive to write this review. This review is my honest opinion after doing much research and purchasing this product for use. Prior to purchasing any product I conduct thorough research. "Was this review helpful to you?" if it was please select "YES" below. Thank you! :)