SimPure Whole House Water Filter Housing (DB10P), 10" x 4.5" Sediment Carbon Filter Universal Housing, Pre-Filtration System for Well and City Water, 1" NPT Port, Pressure Release

They leak around the gasket. dont buy these. No matter how well I screw them on they always drip and they are new.

This is my first whole house water filtration system. This is the smaller size I0” long. We have excellent water flow in our two bedroom home. It’s only been 18 days since I installed it on our mobile home hooked up to city well water. The filters are pure white before use. Look how much sediment it’s trapping! I included a picture of one of the 5 micron filters in the 4 pack I purchased together as a money savings deal. I recommend you also go that route. I decided to install a filter because of our water heater having heavy amounts of sediment inside after purchasing the place August of this year. I was also wanting to protect the valves in all our new appliances from damage. I think of how this sediment was getting all over me taking a shower! I knew there was a degree of sediment in any tap water. But not this much! I can’t say how much I highly recommend this filter. It’s a very reasonable price for the water filter and 4 pack of filters. Sad to say all the copper hardware cost more than the filter and cartridges. But I wanted to get away from using galvanized pipe.Sealant tape is supplied and a replacement pressure release valve rebuild kit. A canister wrench is included with the kit. Follow all the instructions provided. Use plenty of the included sealant tape especially at the fittings on the filter. I had to redo because of skimping. Follow the instructions. They give special directions on tightening fittings. I also carefully made sure the filter is in the shade at all times. A worry I have about sunlight & UV causing growth of some kind in the filter assembly. I highly recommend this filter!

The unit seems to be well constructed. Once installed, it works well, with no noticeable decrease in pressure or flow.I used a male pex nipple on both sides of the filter, and pex everywhere else. That makes installation pretty easy.The filter housing fits well, no leaks. Just make sure you have it straight when you start. I plan on putting vaseline on the o ring at each filter change.The only issue I had is with getting a good seal where the male fitting enters the filter. Just use lots of tape and tighten it a lot. I probably didn't tighten it enough the first time because I was afraid of breaking it.

I purchased and installed this unit in March 2021 with no difficulties. It filters the water just fine with my filter choice.Now for the problem, and it's on me for not paying attention. I ordered the SimPure DB10P and assumed that is what I received. I change the filter regularly and today, 23 August 2024, during my filter change I noticed my o-ring is out of tolerance and had to drop it in the freezer to shrink it a bit to ensure a good seal. I went on Amazon to order a new seal and to my dismay I saw my model housing should require two o-rings and the inlet and outlet ports should have brass fittings installed from the factory. Mine had neither, meaning I was sent a DB10 NOT a DB10P. Like I said the filter functions fine but it's not what I paid for.

If you're looking for a whole house filter, this is it ! Installation isn't easy but it isn't terribly difficult either. Total time for me was about 7 hours (including one extra trip to the hardware store) but could have been a lot less.First the bad news... I had two leaks ( a fitting and the o-ring seal). However, both of these turned out to be operator error and were easily taken care of. Also, the bracket comes with screws to mount onto the filter housing, but not to mount the bracket to a wall so be aware of this.Second the good news... I love this filter system. It wasn't terribly difficult to install. As you can see, I included a by-pass so that I can change the filters without shutting off water to the house.This housing unit is compatible with any filter that is 10x4.5" so you can easily choose the filter that suites your particular application. I would recommend getting a spare filter, so that you already have one when it's time to change.As for changing the filter, there is no indicator (I actually like this because no batteries or electricity is required). To know when to change, check your last year's water bill and estimate time based on water usage and filter capacity.In short, if you need or want a whole house water filter, this is a great buy for the money ! Highly recommended !

Easy to install, even with a 1 micron filter I didn’t lose any water pressure. Feels durable, my only regret is not looking to see if a clear one was available. Other than that I love it. Fantastic, simply designed water filter housing.

Just do it. I hate the taste of chlorine--and sometimes the city water tastes like dirt. Don't do just one like I did--Go ahead and get the double filter: One for sediment and one for chlorine and taste. One did ok, but two is a lot better. I like to drink straight out of the tap, and these filters allow me to do that.