STIROLLThin Replacement Band Compatible for Apple Watch 38mm 40mm 41mm 42mm 44mm 45mm 46mm 49mm, Stainless Steel Metal Wristband Women Men for iWatch Ultra SE Series 10/9/8/7/6/5/4/3/2/1, Gold

While aesthetically, I feel like the band could be a tad wider, I am very impressed with “STIROLL Thin Replacement Band Compatible for Apple Watch” in silver. The brushed metal beads go with silver Apple watch and the alternating glossy beads look great.The band feels durable, but not heavy. The clasping mechanism matches a more expensive watch. I like that links can be removed just like a quality watch band.The band arrives wrapped in plastic to prevent scratching. A tool for adjusting the length is included. Don’t be afraid of the steps below. It’s actually quite easy, but takes patience. Here is how I adjusted my band:1.) Attach the band to watch, slide over wrist, and close the clasp.2.) I pinched the excess and estimated how many links I needed to remove for a snug fit. I would remove half the number from each side to keep the clasp centered.3.) Remove the band completely from the watch and lay it on the tool so the arrow on the band is pointing away from the “screwdriver.” Start from the outer end of the band.4.) Line up screwdriver with the screw and turn so the screwdriver moves forward (clockwise). You should see the pin protruding from the other side.5.) Lift the band and pull out the pin. Separate the band pieces. Repeat this step a second time to remove the link section. For example, if you needed to remove 4 total, move over two links from the end and remove 2.6.) To join the two sections, line them up and insert the pin IN THE SAME DIRECTION AND AREA it was removed. That’s the “skinny” end of the pin on the side WITHOUT arrows. Turn it over and push down on a hard surface. You could even use the tool to adjust the pin.7.) Repeat steps 3-6 on the other side.8.) Attach band to watch, slide your hand in, and close the clasp. You may find that you need to remove more links or add some back in.The tool comes with extra “screwdriver” tips. Let me know if these instructions were helpful.

Quick shipping, easy to adjust the band size given the provided tools :) matched a titanium bezel that I bought! I like it that it feels lightweight yet not cheap.

Easy to remove links. Good quality tool, unlike other watch I purchased in the past and broke.The band seems good quality. I expected a little bit different tone of color, as on the website, but is slightly different, it's ok, I can live with it, I like it.I adjusted it to fit my arm but because of the weight it goes down to my wrist, which is also fine, because that's where I used to wear my watches.That makes it even easier to look at the watch as the hand is flexible to move.

The media could not be loaded. This band was easy to adjust and the closure functions properly. It was easy to add in my watch. The color looks good although I don't wear this one everyday to know how the color will change. However it is durable and a great value.

Very good quality, comes with tools to adjust links. Wife says it’s comfy and color matches with Series 8 stainless steel watch.

I love this watch band so much!! I got the silver with rose gold to match my apple series 3. It looks fantastic. It was easy to remove a couple of links, especially with the multiple of videos out there to help. I definitely recomend.

The media could not be loaded. I was surprised how well made this watch was! It’s heavy but not too heavy. Looks expensive! I bought the silver and gold. I did end up removing several links, and it’s nice they included instructions and tools. Once I got the hang of it, they were easy to remove! Just a bit time consuming, but very much worth it! Tips I’d tell you is when you’re removing a tiny prong, you have to push a bit at the end and you’ll hear a pop sound as it comes out. I was worried I was going to break it but I didn’t- it just takes a tiny bit of pressure. Second, make sure the correct side is attached or you’ll have to start over. You want the 3 black ovals to be on top (the side of your watch face) and the ones with the silver middle oval on the bottom (see my photo with a circle of the area I’m talking about). If you don’t do this correctly the band won’t lock in place to the watch face. This isn’t noted in the instructions and added another 10 mins to my assembly to re-do. Like I mentioned, there’s a bit of work to adjust sizing but it’s a gorgeous watch and you should definitely just buy it!

This company sent me a package that someone returned. The links were already taken out and everything. The instructions was scrambled up in the box. However I won’t lie the band does look nice but it shouldn’t have been used to where I notice it . Ijs