Genuine Volvo Blue Grille Emblem Badge fits: S60 & XC60 models (Larger Emblem)

This fit my 2013 xc60 front grill perfectly! Thanks

This was easy to install and looks brand new.The hardest thing was getting to old one off. This badge is a thin decal adhered to a metal backing which installs as one piece. My old decal was pealing off its metal backing so for a moment I thought I needed to peel off and replace the thin decal. But, you need to peel off the both the old metal metal backing strip and the thin decal together and clean the surface where the new Badge is going to adhere. Then you just peel of the release paper from the back of the new badge and press it firmly into place.

Purchased this to replace the blue Volvo emblem/label on our 2010 Volvo XC60. It is actual OEM Volvo and fit perfectly. Also arrived in record time. Used a razor blade to get under the old metal emblem in the bottom left corner, pried it up enough to be able to grab it, and pulled it the rest of the way off. Make sure you are all the way under the metal and not just under the clear plastic top coat. Cleaned off all old residue with Goo Gone and Windex. Made sure it was dry, then pulled the backing off the new one. There must be a magnet in there somewhere, because when it was centered and close enough, it sucked the emblem right to it. I ran a my fingers and a rag over to make sure no air bubbles. Didn’t wash it or get it wet for 72 hours as advised. Less than 10 minutes to fix. Beautiful!

Ordered the Lager Emblen BadgeI received two Boxes with my order. 1 had the larger Emblem Badge in it which was for my vehicle. The 2nd had the smaller Emblem Badge. If I see someone with the smaller Emblem on thier car I will off it to them.I applied it 2 weeks ago. I did clean the area well and let it dry before applying. Also, waiting till I had a sunny day with temps above 60 degrees. It seems to be still adhered very well. I have not used the car wash yet (pollen season, use graden hose to rinse vehicle off). That will be the true test if it survives that event.So far it is worth the money!

Look like the original, fits perfectly

Looks good

Make sure you pry off the old piece of metal backing from the previous one. I didn't know this until a read a review on the product. Remove the old backing and clean w/goo gone or some type of rubbing alcohol prior to replacing w/the new one. It will look brand new, great product.

easy to apply, good quality for your money has yet to fall off or break apart and i have went 400 miles with it on with speeds up to 100mph. I also pressure washed it no signs of wear and tear yet