SkyGuard Shed Roof Kit - EPDM Rubber Roofing Kit for Sheds & Outbuildings - Longer Lasting Alternative to Roofing Felt for Sheds (3.5m x 3m)

Very easy to install, it took 2 of us just over an hour from start to finish. The old felt roof leaked quite badly and happy to report no problems with the new roof covering after quite a heavy rain storm.

Much easier than felt to fit and looks better as its one piece. Easy to cut and fairly easy to remove bubbles. Instructions supplied for a pent roof but it's a little different for a single slope. We used a long piece of timber to stretch and anchor, working downwards. Wrapping it first to keep it tight and positioned for the adhesive.

Excellent product very tough rubber and fitted over old garage roof easily. I missed judged the size and ordered larger than needed but better to be on the safe side. Depending on what you use it for a better overhang on a garage is best to keep water out. This will last longer than any other roofing product advertised.

This is a really good product that was easy to install. The rubber sheet is strong and durable and there is plenty of adhesive. My only gripe is that the product is described as a single sheet but mine was two pieces that had been glued together.

Everthing in one box super easy to install and understand the instructions. Over the moon with the finish and how easy it was compared to a felt roof and total confidence in it being more water tight than traditional materials.

Great product. Easier than felt and hopefully will last longer. I used a 9" roller on a pole to spread the glue. The black mastic holds the sides down but I needed staples for the folded corners.

The kit turned up on time and contents were as expected:Exactly 3.0m x 3.5m rubber sheet circa 1.0mm thickness. Two tubs of glue and a mini-roller. Disposable plastic gloves. A tube of sky guard mastic.After reading some online information, I decided to replace the polycarbonate sheets with plywood sheets as product is described as for bonding to wood. Laying out the rubber sheet on the roof revealed how exact the measurements were.Thankfully 25mm on either side for the conservatory is sufficient to drop into the drainage channels, it was a bit close!I ignored the mini-roller as it was ridiculously undersized for the area I am doing. Made use of an old large paint roller I have.Having spent time brushing the sheet flat and letting it relax as much as possible I applied the glue. There is sufficient for the area, with little to spare. I have some left over as I have an overhang of 0.3m x 3.5m which requires zero glue. Otherwise I think like others there would be an exact amount of glue. Minimal wastage is good for the environment. Brushed out air bubbles as best as I could, and it is hard to do on an area this size by yourself. Having to accept it is not perfect. The glue changes colour from white to a luminous violet in the sunshine and if you get it your hands it becomes impossible to handle anything as the tackiness starts to kick in. Recommend a decent throw away pair or two of disposable gloves. I did not use the thin plastic one which are supplied.The bulk of the job was done in a day, having to resort to use of ‘flashband’ product, purchase separately , at the point where the rubber meets the wall to achieve a waterproof seal.I find the product is easy to use, apply and relatively quick to fit compared to traditional felt roof product and it should last 40-50years.Superb stuff. Just measure twice before buying.Keep the leftover rubber and use it for other tasks.I have found several uses for it over the years, mainly hose pipe washers, tap washers, weather strips, draft excluder.After a recent severe storm of high winds and rain, there are zero leaks, no drips and no trickles of water on the inside of conservatory as there was once before.Job Done. Well Happy. 😃

A good product and easy to install.