CORSAIR 4000D AIRFLOW Tempered Glass Mid-Tower ATX Case - High-Airflow - Cable Management System - Spacious Interior - Two Included 120 mm Fans - Black

5/5 on this FRAME 4000DPros:- Very easy to build in with minimal tools and Corsair actually supplied a ton of extra screws with this guy! Very sweet touch as I normally use miss-matched stuff I have laying around. Now all my screws match and I have extra still! Thank you Corsair!!- The frame... of the build is very sturdy and all of the panels are high quality. I really like the way the panels connect to the frame.- This case comes with 3 very serviceable and actually quite nice looking/ quiet-ish Corsair fans. For the price, I thought I needed extra fans but to my pleasant surprise Corsair includes them. That's my fault not reading.- Really what I will say about pros is this, there are many great things about this case, I wont cover all of them and will miss many great features about this case.-ability to fit 12 fans or 2x 360mm radiators at the same time.- Ease to work inside of and manage cables with the included Velcro straps.- GPU leveler/ This case can fit the largest of GPU's.- *Subjective pro* This case is HUGE!!- I really like how every panel is removeable which makes accessing things during and after the build a breeze.- The case has plenty of airflow, go figure,- What Corsair does here is a great job of providing accessories with the case so tailoring the case to your airflow, lighting, storage, GPU mounting (vertical or standard) needs are just a cut above every case I have ever worked in. I really enjoy it, Thanks Corsair! 10.5/10-Filled with great details you will find during your build. I really like the yellow grommets around the case screws that saves the case from being marred during assembly. Things like that just threw this case over the top for me. Awesome.Cons: I mean the only thing I can think of is that they have been making these 4000D cases for so long that I got confused when buying this one and another. I thought I was buying two identical FRAME 4000D cases. One in white and one in black... The white one is apparently an older design. It didn't fit a 360 AIO in the top. I should have read the advertisement better and that is on me but be aware that these cases are not all built equally. The FRAME 4000D is what I should have bought on both builds but I got an Airflow 4000D in white and a Frame 4000D in black the latter is a better design in my opinion, probably objectively speaking too. I am very happy with the Black Frame 4000D and the older one as well... it will do... the new design however, it is far superior in every way to the older design of the older 4000D.Only other con that I am going to knock Corsair for is the lack of rubber gaskets/ grommets around common wire routes... not a huge issue if you pay attention to what you are doing but for the price and all the other great features... meh... just be careful with your wires.Awesome case... highly recommend. Thank you Amazon and Corsair.Side note. The front USB panel arrived broken, pinched USB-C cable between panel and case frame... manufacturing oopsie. So no worky worky on initial build. Non issue, however, because Corsair customer support was prompt to address this and send a new front panel unit/ cable, unfortunate but worth mentioning the customer service was A1 quality customer support. If mission critical you have a working front usb panel on arrival.... acknowledge this seems to be a common issue with these cases. The customer service was VERY understanding, seemed to be a known issue w these. Specifically I am talking with the FRAME but also the older design too... though my specific issue was with the FRAME design and front USB hub with that one. Over all 5/5 great case's in both regards if you need something large with great airflow for radiators. Thank you Corsair!!Another feature worth mentioning is that the rear exhaust port of the case supports a 140mm fan... its a nice touch from Corsair.

Great case, good customization, bigger then what I had anticipated though, still tryna figure out where to put it, but overall a great case and I’d recommend it to anyone who does want a case, it has great airflow.

Perfect case for enthusiasts on a budget. I added two 200mm Noctua fans for a better looking smaller torrent. I can fit my 4090 no problem running cool while max clocked.

I recently built my first PC a few weeks ago and I chose my parts through a build guide on pcpartpicker (a great website I really recommend to anyone). I had no idea about what made a case good before ordering this case, but it was only $80 so I went with it as my case cause it looked nice. After having some time building the pc within it and using it, I can highly recommend it as a pretty spacious and airflow positive case.What I liked most about the case is the accessibility to mount fans all along the front top and rear of the case. I really don't like the idea of my PC getting too warm, so I got additional corsair fans to mount all around it to pull air in and out, which was very easy to install for this case.I love the finish of the metal, I got the black version, and I appreciate the matte metal finish, no blemishes were on mine, and the tempered glass is a nice tinted kind and also nice and hefty, so I like the overall build quality of this case. Very simple and effective and I would recommend it for someone who isn't going with a flashy pc build. Certainly would also look good with the all RGB lights design, but I didn't go that route.Another thing I hate is dust. Man I dislike getting dust on my electronic equipment, so what scared me about this case was that it has so much open areas for air to flow through the case, that dust would start to pile up inside. But I was excited to see that the front, top and bottom of the case all have dust guards that either clip in or are attached via magnets. So rinsing these dust guards off every so often will keep the inside of you pc nice and dust free, which I really enjoy. Also just to note, Corsair is going with yellow highlights on certain screws and their branding on one of the dust guards, but it is extremely small amount of yellow. Besides these yellow highlights the case is all black, but its something to keep in mind if you don't want any other color on your case. I suppose you could remove them if you'd like, but I enjoy the yellow tags.The cable management for this case is really nice, as there are many channels and openings from the front to back of the case to get your cables through and wrap up with ties. The case also comes with these nice corsair velcro ties that hold big bundles of your cables together with, and I appreciate that include as they were really nice and big.There are only three cons I can think of for this case, and they aren't very big:1. Some of the metal pieces, especially the pieces you will connect the exterior fans or radiator to, are really thin pieces of metal. While I like that they are thin, when you screw in the fans, you need to be careful cause they can be easy to bend. Again it's not even that bad, just be careful when screwing things into this case case the metal can be so thin.2. The big tempered glass door on the front sits very securely in place, but when you want to open the front of the case you need to unscrew the panel to the case and physically pull it out and place it somewhere else. This is the same for the back of the case too, but the back panel is metal. The biggest difference I wish this case had was that this glass panel swung out, so that you didn't need to take it off. Its still really well made, but I like my glass panel to be free of smudges, and when you have to handle it and take it off every time you need to access the inside of your pc, it is annoying having to physically take it off and get your fingerprints on the glass.3. The last thing is that the power supply with the cables is a really tight fit in the bottom of the PC, but its only tight if you have the hard drive holder in. I would suggest unscrewing the hard drive holder and taking that out when you are building inside your pc so you can easily get at the power supply. WIth the hard drive holder out, its actually pretty accessible to get to the power supply ports. The only con here is that its such a tight fit with the holder in, and trying to screw the hard drive holder in while all the cables are running up next to it into the power supply is really annoying and tight.Besides those three really small cons, I really enjoy the look, feel and accessibility of this case. I would recommend to anyone who wants that airflow quality and I like the look of it as well, really simple and clean.

This is wonderful. Considering new version since has the capability of holding more fans.. Only con with this is you have to remove the glass over some cushion, otherwise risk of it falling and breaking are too high. Still giving 5 stars since the customer support still sended me a free replacement even after warranty was over